does anybody know what the specs on a cherokee column is for a psc orbital valve adapter! doing full hydro and was having trouble finding what gm column model came in the cherokees could use some help if anyone knows i got an 89 xj!

Call them and they can do get it done for you. They didn't blink an eye when I told them I wanted the orbital valve to bolt onto the adapter and the adapter spline to match the stock steering shaft. It didn't cost anything extra, but I don't know if its a standard GM spline or anything either, so like I said, I'd suggest calling them. If you can, call and dial ext 107, thats Kelvin. He's a really helpfull guy and got everything I needed exactally right the first time. Another tip, if you got the pump from them, definately use the correct installer for the pulley. I didn't and punched a hole out the back cover with the input shaft. Oops.

http://www.fototime.com/C19A9C1E4DFC33D/standard.jpg

http://www.fototime.com/8A12371A891954D/standard.jpg

Are you talking about the little u-Joint adapter that goes from the orbital and connects to you shaft, I will did and see if I can find the part # from when I did mine, may take a while if I can even find it since I did mine a few years back

count th splines on your pcs and measure your shaft, here is ones you can get from Summit, I used the Flamming River ones and they work great
http://store.summitracing.com/egnsearch.asp?N=700+300588+115+4294848498

count th splines on your pcs and measure your shaft, here is ones you can get from Summit, I used the Flamming River ones and they work great
http://store.summitracing.com/egnsearch.asp?N=700+300588+115+4294848498

That doesn't make any sense, especially when he can use his stock one. Unless its bad, why replace it? Its not like its going to see any more resistance from the steering box. He's gonna be using (has to use) the adapter that splines into the orbital valve and PSC will spline the end of the adapter to work with your stock steering shaft/u-joint thingy.

Is he looking for the whole column or the joint ?

ya theres nothin wrong with my joint and i was just tryin to figure out witch adapter to get cause i dont really need or want to replace my whole steering column! my brother just conected it strait to his column on his bronco and just mounted the orbital valve close to were the old box was! but thanks for the help i didnt want to just call them and not have anything togather but i will try the extention and talk to that guy!

thank 53guy that helps alot!

thanks again 53guy i called kelvin at psc and he took care of me he knew it instently now i just gotta wait on the parts and then get to work on it!

No problem, any time.