|
: new toys arndog 06-27-2002, 08:50 AM not very exciting for you D60 guys but should work out well for me. What you see is a 30 spline centered cruiser axle from dutchman. I had them cut down and respline a long side rear axle. The other axle is the stock 10 spline. Should have a 30 spline rear for just under 300 bucks. Not to bad arndog arndog 06-27-2002, 08:51 AM sorry for the crappy pictures arndog wngrog 06-27-2002, 08:54 AM That is cool! When I did the centered Cruiser axle that I had, it had mini outers on it so I used Mini Truck axles. What you have is good 30 spline axles that will work with an old style centered Cruiser axle right? rugburn 06-27-2002, 09:09 AM Yeah BABY!!!!!!! Under $300.00!!!!!! I'll be sending in mine for the FJ 25 housing I am running! :usa: :usa: :usa: :usa: :D :beer: ARNDOG!!! Medusa 06-27-2002, 10:51 AM I highly recommend Dutchman for this and other types of custom axle work. They know what they are doing and the quality of their machining is absolutely first-rate. They did the axles for both my front and rear Dana 60s. I think you will really like this setup, Arndog:smokin: BJ On Roids 06-27-2002, 03:27 PM how hard would it be to put the mini outers on a cruiser? cheaper too id think? or is the custom axle opiton just cheaper/easier :confused: arndog 06-28-2002, 04:31 PM yep dutchman was awesome. Nolen, these '30 spline' axles are is a long side 30 spline axle cut down to centered cruiser length. Does that make sense. Dutchman has great prices too. I got 3 cut down and resplined for 120 bucks. If I was to put mini outers on a centered cruiser axle id just put the entire mini axle back there. arndog | |