Free Shipping on these! Saw a post about a spring perch being of an anti wrap design. Apparently they never used lift blocks or wheeled. As it was obvious they did not understand what the term anti wrap means as their perchs set extremely high off of the axle they were welded to.

So w/ this in mind we have designed a low profile perch in currently five different sizes (2 more to be added shortly). Each perch is cut from a single piece of 1/4" plate and formed on a cnc brake to form a beautiful low profile designed part. So as not to lie to our customers and stay within the idea of an actual anti wrap design we kept these to a height of .625" tall overall from top of axle tube to top of the perch. All of them are 7.125"s long. Thanks Shawn

Current sizes available

Width X Axle Tube Diameter

2.5" X 2.75"
2.5" X 3.0"
2.5" X 3.5"
3.0" X 3.0"
3.5" X 3.5"
http://www.greatlakeoffroad.com/images/springmount.jpg

When ordering please reference the 3 digit part number to get the correct part



PN X Width X Axle Tube Diameter

PR1 X 2.5" X 2.75"
PR2 X 2.5" X 3.0"
PR3 X 2.5" X 3.5"
PR4 X 3.0" X 3.0"
PR5 X 3.5" X 3.5"
http://www.greatlakeoffroad.com/images/springmount.jpg

Our PN PR2 is smoking today $25 per set shipped must the magic number.............. Well that or everyone feels like they are getting a fair value on these, no gimics just a straight deal. Thanks Shawn

Don't forget the free shipping! What you see is what you get no number games here!

bump for a good deal

TTT for the best price anywhere and no fuzy math either

Forget math, discounts and the like. How about a great price $25 delivered to you. Period. I understand all the excitement w/ commodities running rampant like they are. No worries we have plenty in stock.

bump

How about 2.5x3.25..for my Currie big tube rear?

Thanks, Cary

Give me a call we can build you a set.............................


How about 2.5x3.25..for my Currie big tube rear?

Thanks, Cary

8 yes count em 8 new sizes due in next week! New stock all at this terrific price!

Too many to list, we have more sizes than anyone else!

true anti wrap low profile design!

ttt

these are great i run these perches on my YJ with a spring over. rear dana 60 with 4.56 gears and 38.5 and havent had an issue with any axle wrap and had the jeep on the freeway going 60 + mph

These are by far the best and the beefiest perches out there! great customer service too!

Thanks for the props, its great to hear real world feedback from the end user. Shawn

ttt

Competition is good! All we are saying is why pay more for the same equally built product.



"Name calling will not get you any points, in fact it makes you look like the 2 year old you are."

ttt

On a similiar note we have been in business in general long enough to know we will be here for the long haul. We are not the company who has not hit the five year bump and is still unsure how to pay his light bill.

Competition is good! All we are saying is why pay more for the same equally built product.



"Name calling will not get you any points, in fact it makes you look like the 2 year old you are."

ttt

do these have just a single center bollt hole or the offset ones as well like some of the other brands?

single hole centered up on the perch. Thanks Shawn

Great idea! Any trip reports on how these work, and what people are running them on? (Vehicle, total suspension lift, engine, tire size, etc.) These would be A LOT cheaper and easier to install than buying or fabbing up some kind of anti-wrap bar for my Early Bronco.

I have run these on the rear of my EB for years (302 pane, C4, Stak 2spd, 37 cut boggers approx 6" of total lift) Only problem I ever had was I took a set of stock leaf springs down to 2 or 3 leaves and actually bent a spring (not broke bent) However I see that as a testament to the strength of the perch as it bent approx 3" in front of the perch during a trail ride doing an obstacle.

are you making the right sizes for the AMC 20 and Dana 30 for a CJ7? if so whats the price on them. thanks

ttt

many sizes available!

ttt

you need a website that lets people buy stuff!!

sunday... tried to call, no answer. will call back and leave a message I guess?

putting the final touches on it as we speak, I will send you a PM, just let me know what you need and I can call you or send you a link to pay via Paypal. Thanks Shawn


you need a website that lets people buy stuff!!

sunday... tried to call, no answer. will call back and leave a message I guess?

Bump! For the coming Friday crowd.

How about some current pictures since your first post has red x's

http://www.greatlakeoffroad.com/GLO-Axle-Spring-Perches.html

After all these years still a hot seller.

ttt