I'm either completly retarded, or I'm missing something entirely. I have a set of Superlift springs, was going to make my SAS brackets this morning, but cany figure out the width for the mounts. Everything I look at specs for a 2.5 or 3" spring width, and I measure the spring at 2.5" wide, but the bushing width was around 3 5/8 if I remember correctly. What is the correct width for a front spring hanger for a Chevy truck 73-87?

I'm either completly retarded, or I'm missing something entirely. I have a set of Superlift springs, was going to make my SAS brackets this morning, but cany figure out the width for the mounts. Everything I look at specs for a 2.5 or 3" spring width, and I measure the spring at 2.5" wide, but the bushing width was around 3 5/8 if I remember correctly. What is the correct width for a front spring hanger for a Chevy truck 73-87?i think stock chevy front springs require a 3" pocket

I just cut one of mine off this evening, but the other is still intact awaiting the torch. Will get a measurement for you in the a.m. 87 3/4 ton suburban with a 10 bolt coming out of it and stock springs.

I have 73 chevy 1/2 ton and i got 3 5/8" on the nose

Killer, thanks for the info guys!

mine is 3 5/8" also. 87 3/4 ton suburban.