if i got an 205 out of a truck with a manual trany will it bolt up to a 350 or 400?

Not without finding the right input and adapter. Stick 205s had 10 spline inputs. Adapters were also different.

I'm not sure, but My T-case page (http://www.alaskaoffroad.com/tech_2.htm) might help a bit.


Brook :usa:

http://www.alaskaoffroad.com/images/Tech/205inputshafts.jpg

Here you can see four of the different kinds of 205 input shafts. One the very left is the 27 spline Th-350 version. The next one over is the 32 spline Th-400 version. Then the SM-465 10 spline shaft and coupling sleeve, and on the right is the 31 spline Ford input shaft that I used with my Dual T-case setup.

I have a gen1 type range box that will fit between what you have.
Let me know if your interested
Mark:usa:

hmmm... now that I read the post, I see that you are just asking it the bolt pattern will work. :D

Baddog said it all:D

thats also what i was looking for

thanks

what kind of truck?

someone told me just the other day that there is a 205 that comes on a 465 that has the same splines as the 400 model, I know i've never seen one, think he said the later 465, 205 :confused:

same # of splines but different length

Yeah, the 32 spline 465 has a mofo long output. Also, wasn't that in front of 80 something 208s rather than 205s?

they are Chev 205s with 32 spline female inputs that are long as well and match up to the 80+ 32 spline 465.
they have the round bolt pattern