Pretty simple, just post up here if you need one.
I will contact you as it become available.
Be advise that the more people that beat on it out of being :confused::confused: just means the longer it takes me to rebuild it in between.
Its intended to be used with a hydraulic press, not a sledge hammer.

Pete


Drm
Lt1CJ
Doc
RedDwarf
mo
4x401cj
Prohibited
MudSoup
PonyDriver
NCToy76
Ben Segrest
ItsaCJ6
Mister Fubar
Agro
SinisterTrucker

TempestMan <has
YardDog
Rock Killer

i need one. zip code is 28092 lincolnton nc if u need it

Great to see this, I would love to buy an 80% off you as well, let me know the cost and I will paypal ASAP for both shipped to 95621.

Thanks, Matt

Definately gonna need one next month.

How is this going to work?

We cover shipping/beer etc?

Is there anyone else in the Nashville, TN area who needs it? I have a shop and a press, and I'm willing to coordinate with others (CMF?) who are nearby but might not have a press.

That is awesome Pete! Great idea and very generous of you. I could use it when it becomes available. Let me know your favorite beverage of choice and Ill send some back with the jig. :beer:

I am in line for whenever and people in VA can use my shit if they want to do theres here as well.
20T air/hydro press makes short work of bending.

It is out right now. As soon as I get it back I will contact first person that replied. if they want it, I will send it to them.

If you need flats go to Tapco or AK-Builder.
Pete

It is out right now. As soon as I get it back I will contact first person that replied. if they want it, I will send it to them.

If you need flats go to Tapco or AK-Builder.
Pete

who's would you rate as "better"?

oh and I need to get back with you about my "prize" I won :laughing: :flipoff2:

AK-Builder has the BEST flats I have seen.

Of course I am now using Nodak 100% receivers and man oh man these things are sweet.

Pete

Its intended to be used with a hydraulic press, not a sledge hammer.

Pete

Blasphemy! BFH's rule. :laughing:

AK-Builder has the BEST flats I have seen.

Of course I am now suing Nodak 100% receivers and man oh man these things are sweet.

Pete

How about "using"? ;)

Any word on replicating an underfolder trunnion?

How about "using"? ;)

Any word on replicating an underfolder trunnion?


:laughing::laughing::laughing::laughing:

I will post details in the build thread later today

Pete

I would like to get in line to use the jig. Thanks for the offer. If anyone else in the Boise, Idaho area needs to fold some, maybe we could link up. I have access to a press.

RD

Am I inline from when I pm'd you early in December? LOL

I purchased two flats from AK-Builder, I plan on doing a step by step procedure with pics.

:standing in line patiently:

Do you want it back between users or should I just ship it to the next in line when I am done with it?

EDIT: I'm out. Decided to go with w/ a Nodak 100% instead

AK-Builder has the BEST flats I have seen.

Of course I am now using Nodak 100% receivers and man oh man these things are sweet.

Pete

1) Please put me in line for use of the jig.
2) Why do you consider the Ak-builder flats better than Tapco`s?
3) X2 on the Nodak`s. Very nice receivers. I actually think they are worth buying over $uck1ng with bending, heat treating, welding rails, etc. Unfortunatly, I had already bought some Tapco flats before I was turned onto Nodak. :(

I have the bender back in hand.
Going to replace the bolts and then send it on to the next person.

Pete

1) Please put me in line for use of the jig.
2) Why do you consider the Ak-builder flats better than Tapco`s?
3) X2 on the Nodak`s. Very nice receivers. I actually think they are worth buying over $uck1ng with bending, heat treating, welding rails, etc. Unfortunatly, I had already bought some Tapco flats before I was turned onto Nodak. :(



2. I just find them to be more accurate. Better quality stampings. Also the rails that Curtis includes with the flats far surpass TAPCOs.
They have the hammer pin buldge.

3. :smokin:

Please put me on the list Pete


Brett

Requesting to be put on the list.

Thanks Pete!

Hey Doc you can get 100&#37; receivers shipped to you right?

I'm not trying to cut Pete out I just don't like paying the $50 FFL

Hey Doc you can get 100% receivers shipped to you right?

I'm not trying to cut Pete out I just don't like paying the $50 FFL

Not unless you have your own FFL.

Hey Doc you can get 100% receivers shipped to you right?

I'm not trying to cut Pete out I just don't like paying the $50 FFL

DoC can only get C&R stuff. (he's out of town)
I don't sell AK receivers really. Just resell NoDaks stuff. No mark ups.

DoC can only get C&R stuff. (he's out of town)
I don't sell AK receivers really. Just resell NoDaks stuff. No mark ups.

OOh I thought I read one of his post somewhere that he said he ordered up an AK receiver

He would still need to transfer it through an FFL.

I would like to borrow it as well. Also, do you still sell the nodak recievers? If so, PM me about ordering one when you get a chance.

i do not buy that much from Harlen so I don't get a price break. I just order as I need.
So I can sell you one, but you will need to pay the price I paid, ship to me and ship to your ffl.
:D

If you let me borrow your bending jig, I won't mind, even if you make a profit. :D There are other things I've been thinking about ordering anyway.

Also, do you still sell the nodak recievers? If so, PM me about ordering one when you get a chance.

x2 Pete. I'm looking for an NDS-4. I'd rather support the "PBB Sportsman's Store" :D

(that and I don't want to send a money order or cashiers check:flipoff2:)

Thanks Mo.



Please put me in-line. I need to bend up a half dozen.

Can I get in on that list? Did Numidian ever finish his project?

Can I get in on that list? Did Numidian ever finish his project?

Sent Pete two jigs back a few weeks ago. :flipoff2: So don't blame me for holding up the line...

And my little brother made up another jig, if you're coming up to MD anytime soon, let me know and we could meet up and bend your flats up(I've actually yet to bend mine, I'm hoping for next week LOL)

Sent Pete two jigs back a few weeks ago. :flipoff2: So don't blame me for holding up the line...

And my little brother made up another jig, if you're coming up to MD anytime soon, let me know and we could meet up and bend your flats up(I've actually yet to bend mine, I'm hoping for next week LOL)


And you dont speak up when I post asking about a jig :flipoff2:

Sent Pete two jigs back a few weeks ago. :flipoff2: So don't blame me for holding up the line...

And my little brother made up another jig, if you're coming up to MD anytime soon, let me know and we could meet up and bend your flats up(I've actually yet to bend mine, I'm hoping for next week LOL)

You shoulda mailed one to me first. I was hoping to have a local machinist make a copy for personal use. Not going to make it to MD anytime soon. :(

You shoulda mailed one to me first. I was hoping to have a local machinist make a copy for personal use. Not going to make it to MD anytime soon. :(

Print up the 555th jig blueprints and take them to your machinist tard...

You shoulda mailed one to me first. I was hoping to have a local machinist make a copy for personal use. Not going to make it to MD anytime soon. :(

Where are you?

I am contacting people on the list.

Thinking it might be quicket to just have he who has it contact me and I will tell them who to send it to next.

Each person that receives it should take a photo of it in the condition they receive it in. Photo needs to be posted within 36hrs of receiving the jig.

Where are you?

In a house :shaking:


















:flipoff2:

any one in denver that dose not want to wait for Pete's let me know

Print up the 555th jig blueprints and take them to your machinist tard...

Did that you tard. I want to make some improvements to the design and I work better with an example in my hands better than I do pointing at a sketch on paper. :flipoff2:

Where are you?

Nawfuk

In a house :shaking:



:flipoff2:



:laughing:

Print up the 555th jig blueprints and take them to your machinist tard...

Anyone willing to forward me the blueprints? (Don't put a link, I can't log on to gunco.)

If I can have one made, it puts another jig into circulation.

Anyone willing to forward me the blueprints? (Don't put a link, I can't log on to gunco.)

If I can have one made, it puts another jig into circulation.

Quick Google search:

http://www.quarterbore.com/images/555thjig_print.pdf

Quick Google search:




Well now I feel like an idiot :homer:

Thank you!

Any word on where it's at. I'm anxious :flipoff2:

Any word on where it's at. I'm anxious :flipoff2:

On its way to DRM.
The list is correct :D

Can I get on the list? And anyone in the DFW area would be welcome to come over and bend flats at my place. I'm in south Dallas.

Can I get on the list? And anyone in the DFW area would be welcome to come over and bend flats at my place. I'm in south Dallas.




Why don't you just come over and use the jig I've got. I've got a press too.

Thanks for the invitation. I was planning to buy flats to bend for use in the distant future, and I figured getting on this list would motivate me to have the flats ready sooner than later. I am not in a rush, but I think I'll take you up on that if the offer still stands in a few weeks or months or so.

Take my name off of the list please.

On its way to DRM.
The list is correct :D

Sweet! Can't wait to bend mine up :D:D:D

Sweet! Can't wait to bend mine up :D:D:D

Well hurry it up would ya! :D

Well hurry it up would ya! :D

I gotta get it first :p


I'll be wheeling Gray Rock this weekend, so assuming it comes in the next few days, I should be bending mine up the first weekend of May.

Well hurry it up would ya! :D

Yeah, uhm my fault there.

I just found it this weekend buried under some boxes. Thought it had been sent out already :homer:

I gotta get it first :p


I'll be wheeling Gray Rock this weekend, so assuming it comes in the next few days, I should be bending mine up the first weekend of May.

I'm down with that. :smokin:

OK IM ON THE LIST. whats the wait looking like?

OK IM ON THE LIST. whats the wait looking like?

check post number one

gotcha. now theres a little arrow next to who has it.

If anyone local (edit for location: Northern VA) is in need, I'll happily loan mine out if you'll help me put three kits together.

The jig was on my desk at work when I got in this morning - I'll get with CMF and get ours bent up ASAP and get it rolling back into circulation.

Thanks pete :cool2:

If anyone local (edit for location: Northern VA) is in need, I'll happily loan mine out if you'll help me put three kits together.

Paging Pony Driver

If anyone local (edit for location: Northern VA) is in need, I'll happily loan mine out if you'll help me put three kits together.

Paging Pony Driver

I'm in Nawfuk,...the BOTTOM of VA and haven't put a kit together myself yet. I'd be happy to lead the blind though if that's what people are up for.

I'm in Nawfuk,...the BOTTOM of VA and haven't put a kit together myself yet. I'd be happy to lead the blind though if that's what people are up for.

Should I bring the welder? I'm troubleshooting the 125, but I may be stepping up to a 180+ machine SOON!

Should I bring the welder? I'm troubleshooting the 125, but I may be stepping up to a 180+ machine SOON!

Brang it, otherwise it will be me, my redneck ingenuity, a spare dryer cord, a pair of dykes, a razor blade and a brazing rod in the garage. :laughing:

I'm in Nawfuk,...the BOTTOM of VA and haven't put a kit together myself yet. I'd be happy to lead the blind though if that's what people are up for.

Oh I didn't realize you were way the hell down there... I thought you were central/northern :laughing:

So, any tips on getting the best receiver out of this jig?

I bent one up this weekend, but it's just not fitting exactly right on the AK74 (yes, it is a 74 flat). I bent the top rails, and it seems like they are too low to fit the trunion grooves.

Also, on the AKBuilder flats, is there supposed to be *that* much to trim off the top rails?


I am gonna bend up the ones I have for use later, but I think I will also just order a Nodak receiver and be done with it :laughing:

There are two 1/8" holes in the bottom of the jig. All the flats I ever saw had these same holes. They are the center line of the flat. Use two 1/8 drill bits to line up the jig, flat, and the bottom bar.remove bits after tightening bolts on bottom bar.

I never had an issue or heard from anyone else that did.

Pete

When I lined up the jig using the alignment holes - it wasn't centered on the jig - based on several measurements I took :confused:

Oh well, I've got another 74 flat to try if I screw this one up :laughing:

When I lined up the jig using the alignment holes - it wasn't centered on the jig - based on several measurements I took :confused:

Oh well, I've got another 74 flat to try if I screw this one up :laughing:


Ackkk.

I think you have the 'new' jig that someone made as a copy of my original. I never used it and did not measure it. Fawk!!

I checked your posts for the AK thread, this jig is *not* the same one from there.

FYI, when pressing it in - the frame was not even tight enough to fully bend the sides up against the inner form.

I'll post some pics tonight when i get home.

DRM, don't use it any more. As soon as I get the original back I will send it your way.
Sorry I did not check the new one out more.
Pete

DRM, don't use it any more. As soon as I get the original back I will send it your way.
Sorry I did not check the new one out more.
Pete

No problem. I was kinda shocked when I saw this one, I figured you would have spent a bit more time on fit and finish.

If you send me the known "good" one, I think I can clean this one up to make it in spec to go back into circulation. Ok, by "clean up" I mean re-make several parts, but you get the idea ;)

I'm in Nawfuk,...the BOTTOM of VA and haven't put a kit together myself yet. I'd be happy to lead the blind though if that's what people are up for.

Wonder if Doc would be willing to host a class? I'd definitely make the road trip.

Wonder if Doc would be willing to host a class? I'd definitely make the road trip.

I dunno. If he's in town and I get these plans for a jig made up we can do one as soon as everyone can make it one place and has parts. I'd volunteer my place but I have no press or welder, though those could be drug here and used. I nominate cybergeek to bring his welder. :flipoff2:

I have the jig and a 110v welder (should work fine for this). Would be happy to throw both in the car.

Wonder if Doc would be willing to host a class? I'd definitely make the road trip.



Host a class on what? Bending a flat? Or doing a complete build?


There's several of us that could do just that... some of us could even shoot the entire process in HD... :flipoff2:

I would be in for a build party if it was close enough... somewhere between Dallas, Atlanta, Nashville area.

Edit: If there is interest, we should start a new thread so this one doesn't get hijacked.

Host a class on what? Bending a flat? Or doing a complete build?


There's several of us that could do just that... some of us could even shoot the entire process in HD... :flipoff2:

Doc is a little closer to my house than you are. Well maybe not at the moment, but his domicile is. :flipoff2:

FYI: CMF came over tonight and we bent up 4 flats with the better jig. Give me a few days to try to clean up the first one so it puts out a better flat, then I'll clean both of them up and send them wherever I am told to send them :D

I'll post up a comparison pic tomorrow night between the receivers from both jigs.

:confused: how come im not on the list any longer?

It says band under your screen name there so we just figured you were a nutsack. :flipoff2:

:flipoff2:

It says band under your screen name there so we just figured you were a nutsack. :flipoff2:

:laughing:

Please cross my name off the list. I built a 555th jig. Works good. Need to make some alignment pins though, too much of a pita centering the flat without them. As soon as I tweek it a bit I will loan it out if anyone wants it.

:bounce: me!

How are you guys folding over the top rails? Ball peen and just working your way back and forth? Using a longer piece of metal to spread out the hammering?

How are you guys folding over the top rails? Ball peen and just working your way back and forth? Using a longer piece of metal to spread out the hammering?



Long piece of steel and a hammer.


But there are some press jigs out there that will form the top rails, and they do a pretty good job of it. Some will even do stepped top rails.

Long piece of steel, and then a hard-plastic deadblow directly on the rails.

Don't use a steel faced hammer directly on the rails. They need to be smooth, and not peened all to hell.

K so i still need one to borrow!!!!!

Halo added, hoohaa removed.

DRM has it and is contacting the next person in line.

Pete

hey can i be put on the list,,,,,:D

ok who has one? i need to borrow it. i have a few i need bent up and i would appreicate if the fawks who have it now would hurry the fawk up :flipoff2:

<----- Needs a bending jig. What's the lead time look like right now? In the mean time I'm considering trying the Home Depot route for one since I bought extras.

<----- Needs a bending jig. What's the lead time look like right now? In the mean time I'm considering trying the Home Depot route for one since I bought extras.

braxton's jig is on its way to Halo, then me. I think it's empty after that, send him a PM.

Long piece of steel, and then a hard-plastic deadblow directly on the rails.

Don't use a steel faced hammer directly on the rails. They need to be smooth, and not peened all to hell.
UPDATE: This time, I bent flats at work. I just used a Snappy deadblow, no chunk of steel or anything. Just hammered it over as smoothly as possible. About a jillion lighte blows per rail , and it looks like it was professionally shaped in a press. Worked great.

Used a regular deadblow soft-face hammer just like this:
http://cgi.ebay.com/ebaymotors/Snap-on-24-oz-Softgrip-Deadblow-Hammer_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q 3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318QQ_trksidZp3286 Q2ec0Q2em14QQhashZitem130272320766QQitemZ130272320 766QQptZMotorsQ5fAutomotiveQ5fTools

Sign me up. we have a press at work.

I'd like to be next in line, please. If anyone in the Los Angeles area wants to do theirs while I have it, let me know.

UPDATE: This time, I bent flats at work. I just used a Snappy deadblow, no chunk of steel or anything. Just hammered it over as smoothly as possible. About a jillion lighte blows per rail , and it looks like it was professionally shaped in a press. Worked great.



what did you bend it over?


oh and im still waiting on braxton :flipoff2:

im used to it now :rolleyes: :flipoff2:

Uh... The center portion of the jig. The same thing the upper rails always bent over, no matter what you use to bend 'em. ;)

I will also need to borrow someone's jig. :)
If anyone else in So. California would like to get together to bend flats, I'm in the area, and I do have a 20-ton press. Shared knowledge should lead to fewer screwed-up flats.

You can scratch me off the list. I got tired of waiting and made my own jig :flipoff2:

Go ahead and put me on the list, flats are on the way.

Go ahead and put me on the list, flats are on the way.

Ditto.

Any jigs still floating around?

ok, braxton doesnt answer PM's from me any more.... he has all of my information, and he knows im gonna send him compensation. he said he was gonna send his to me, but it hasnt happened in a month.

i need a jig, i have 3 other people waiting on me here to help them bend theirs, plus mine.


anyone?

Who has my Jig now? DRM who did you send it to?

DRM sent to it Red Dwarf and it's currently en route to me.

Who has my Jig now? DRM who did you send it to?

DRM sent to it Red Dwarf and it's currently en route to me.

for whatever reason, i got taken off of the fugging list and put to the bottom :mad3: :confused:

I bought the one Chris had for sale a few weeks ago. I should have it in this week or next. I'm cool with people borrowing once I bend a couple flats.

DRM sent to it Red Dwarf and it's currently en route to me.

Mo, could you let me know when it gets there? I have a couple flats that need bent. :)

I would like to borrow it too.

Mo, could you let me know when it gets there? I have a couple flats that need bent. :)
It's here.


anyone have a press? :lmao:

It's here.


anyone have a press? :lmao:

3lb dead blow for the first bending with a 2x4 turned sideways on top.
and a hammer and dolly for the rails.
It can be done :laughing:

It's here.


anyone have a press? :lmao:

Are you here?

You can come over this weekend and use mine.

Pete

It's here.

anyone have a press? :lmao:

Just a little one.

http://www.rockstomper.com/images/tools/biggerpressframe03.jpg

:laughing:

Edit: Those are two 5" cylinders; the rusty victim is a kingpin D60 inner C. :evil:

I'm here, but this weekend I'm going back to Omaha to get the last of our things.

I am hoping to be able to bend these things up the following weekend.




I didn't want to bang on it with a hammer either. looks like someone else has though.

I didn't want to bang on it with a hammer either. looks like someone else has though.
:shaking::shaking:
Doesn't surprise me, even with the stuff mentioned before about not beating on other folks tools.

Been a while since I have seen it. Since its 'here' lets make plans for the following weekend.

Scott you want to come down?

Anyone else on the front range want to bend some receivers? maybe a mini build party?

Weekend of the 24th?

I think I can, but it'd depend on my wife's work schedule and the daycare situation for the halfpint.

party at Pete's!


I should be able to get away for a few hours

:shaking::shaking:
Doesn't surprise me, even with the stuff mentioned before about not beating on other folks tools.

Been a while since I have seen it. Since its 'here' lets make plans for the following weekend.

Scott you want to come down?

Anyone else on the front range want to bend some receivers? maybe a mini build party?
is this a go?

I can get away for a few hours on Sat. morning. Earlier the better.

is this a go?

I can get away for a few hours on Sat. morning. Earlier the better.

x2.

9am Sat morning?

I think that works.

9am Sat morning?

I think that works.
PM your address to me please.

9am Sat morning?

I think that works.

Works for me (means I have to get up early) too. Location?

Scottand Mo have PM.

Anyone else? 9am at my place?

are we just bending, or building too?

bah - I'll bring some kits to demil if the time is there.

This is a bend party, but if you want to do more you are welcome. The garage is only slightly more organized then when you were last here. But I do have shelves up finally and amm starting to label boxes and put them up on the shelf.

I can actually see the 105" Rover project again..... it's been used as a storage rack for so long I had forgotten all about it :D

you had a rover in there??? :confused:




:flipoff2:

I'm good with just bending, I don't have any demilled kits ready to build out, and I can do that on my own time.

It's a little too far for me, as much as I'd like to get mine bent. :(

OK, so I have the jig now, but I'm not sure who's next on the list. :confused:

I could still use. After Mo, there are 2 in front of me though.

OK, so I have the jig now, but I'm not sure who's next on the list. :confused:

send that sunny beach over to me. i was half way in the middle of the list 6+months ago, then got dumped to the bottom of the list. i have like 15 to do :D

send that sunny beach over to me. i was half way in the middle of the list 6+months ago, then got dumped to the bottom of the list. i have like 15 to do :D

I'm closer.............:D

send that sunny beach over to me. i was half way in the middle of the list 6+months ago, then got dumped to the bottom of the list. i have like 15 to do :D

Find your post in this thread where you said you wanted it and I will move you up if someone else said they wanted it later.

4x401CJ is next in line and then Prohibited

pretty sure braxton can come off the list, as he said he is sending his jig to me.

send that sunny beach over to me. i was half way in the middle of the list 6+months ago, then got dumped to the bottom of the list. i have like 15 to do :D

pretty sure braxton can come off the list, as he said he is sending his jig to me.

So you need one of mine or not?
:)

4x401 has a PM and shows activity earlier today.

I'm dumb, all info is on page 1.

So you need one of mine or not?
:)

i dont think so. braxton is an asshole, but normally is a man of his word :flipoff2:

I still need it and cannot figure out where I am on the list

:confused::confused::confused::confused:

The name in red in the first post is the next person in line. Your name is on the list. Figure 4-6 weeks per person

Figure 4-6 weeks per person

Good news! I should get it in about a year. :flipoff2:
Quite honestly, I was thinking about making one, since I already have a press. But in the meantime, leave me on the list just in case. :)

:confused:
4x401cj hasn't been on here since ~3 hours before I PM'd him on Saturday, and (obviously) hasn't answered me with where to send the jig. Does anybody have contact info for him outside of PBB?

:confused:
4x401cj hasn't been on here since ~3 hours before I PM'd him on Saturday, and (obviously) hasn't answered me with where to send the jig. Does anybody have contact info for him outside of PBB?

I`m in. sent you my info.

OK, it's on its way to 4x401cj. Probably be in his hands Friday.

Prohibited, you're next--get your info to 4x401cj if you still need it, or let him know that you don't need it any more, and it'll help keep it moving along.

OK, it's on its way to 4x401cj. Probably be in his hands Friday.

Prohibited, you're next--get your info to 4x401cj if you still need it, or let him know that you don't need it any more, and it'll help keep it moving along.

I do still need it so I'll be sending him a PM:mr-t:

I do still need it so I'll be sending him a PM:mr-t:

hey, I am going to try and get jig #2 running this weekend. If I can I will send it your way.

issue is time :)

I need to cut out a blank, then bend it and see if its in spec.

hey, I am going to try and get jig #2 running this weekend. If I can I will send it your way.

issue is time :)

I need to cut out a blank, then bend it and see if its in spec.

That would be cool. I've had my kits for over two years, so you might be able to tell I'm not in a huge hurry:laughing:

4x401cj pm'd me that it will be on it's way to me soon.:smokin:

MudSoup I'm going to need your shipping addy:mr-t:

I still want to borrow this thing:)

You can scratch me off the list, since I've made other arrangements for bending my flats. :)

Drm
Lt1CJ
Doc
RedDwarf
mo
4x401cj
Prohibited<--- has it
MudSoup<--- Ok, so he is a member :flipoff2: <-----Going here next
Braxton357<-- doesn't need it
Pony_Guy<--- not a memeber??
Halogrinder<--- doesn't need it
NCToy76<--- pm inbound
Ben Segrest
ItsaCJ6
Chris
Vortec Cruiser
Mister Fubar
Agro
SinisterTrucker

me too, i have braxtons, which ill be done by monday w/ it..... so i need to send it to someone too.

You can cross me off the list. It's a good thing I don't have to wait for anything else in my life from you guys. Jeez...:rolleyes:

Drm
Lt1CJ
Doc
RedDwarf
mo
4x401cj
Prohibited<--- has it
MudSoup<--- not a member??
Braxton357<-- doesn't need it
Pony_Guy<--- not a memeber??
Halogrinder<--- doesn't need it
NCToy76<--- pm inbound
Ben Segrest
ItsaCJ6
Chris
Vortec Cruiser
Mister Fubar
Agro
SinisterTrucker

FYI I am here and I'm patiently waiting.:D

I would like to add my name to the list.

k well i guess we need to figure out whos next on the list.

Why am I not a memeber? Looks to me that I've been a member since 03...

PM inbound.

n00b










:flipoff2:

FYI I am here and I'm patiently waiting.:D


if you get to denver, get a hold of me, and bring your flats

Drm
Lt1CJ
Doc
RedDwarf
mo
4x401cj
Prohibited
MudSoup
Pony_Guy
Halogrinder
NCToy76
Ben Segrest
ItsaCJ6
Chris
Vortec Cruiser
Mister Fubar
Agro
SinisterTrucker


ok out of this list, who has GOT THEIR SHIT DONE so we can take you off the list, and WHO STILL NEEDS IT.


i have a jig (braxtons) that needs a new care taker.

if you get to denver, get a hold of me, and bring your flats

Hell Our lift maintenance manager is in Denver...I wish this was days ago... Thanks I will keep you in mind.

REMOVE ME FROM THE LIST.
That is, unless someone wants to buy my spot. :flipoff2:

I am contacting people on the list.

Thinking it might be quicket to just have he who has it contact me and I will tell them who to send it to next.

Each person that receives it should take a photo of it in the condition they receive it in. Photo needs to be posted within 36hrs of receiving the jig.

Was on my doorstep when I got home last night. (Waited till today to open outside in case of glitter :flipoff2:)

http://i11.photobucket.com/albums/a174/GogglesPizano/CIMG0488.jpg

http://i11.photobucket.com/albums/a174/GogglesPizano/CIMG0491.jpg

Drm
Lt1CJ
Doc
RedDwarf
mo
4x401cj
Prohibited
MudSoup
Pony_Guy<-- I think this is Pony Driver, correct if wrong.
Halogrinder
NCToy76
Ben Segrest
ItsaCJ6
Chris
Mister Fubar
Agro
SinisterTrucker


ok out of this list, who has GOT THEIR SHIT DONE so we can take you off the list, and WHO STILL NEEDS IT.


i have a jig (braxtons) that needs a new care taker.

Should I take you off the list for you? :rolleyes:

:flipoff2:

I will bend next week and ship once I get an address of the next person in line. (I will actively PM people for addresses once I'm done.)

braxtons jig should be sent next week to nctoy76. so hes taken care of.

I am still waiting:laughing:

Was on my doorstep when I got home last night. (Waited till today to open outside in case of glitter :flipoff2:)

http://i11.photobucket.com/albums/a174/GogglesPizano/CIMG0488.jpg

http://i11.photobucket.com/albums/a174/GogglesPizano/CIMG0491.jpg



Damn, it looks like someone has been beating the crap out of that tool! :shaking:

Damn, it looks like someone has been beating the crap out of that tool! :shaking:

Agreed someone didn't read the instructions about using a press.

Damn, it looks like someone has been beating the crap out of that tool! :shaking:

Yeah considering I just had it a month ago, it is getting more beating

Updated the list in psot one

I'd like to be put on the list. I have a press :rolleyes:

<----------- used a press

http://img.photobucket.com/albums/v482/Stomper_1_Ton/stuff/IMG00165-1.jpg

Just as an FYI, without the proper inner jig, this won't work well at all on yugo flats.

Just as an FYI, without the proper inner jig, this won't work well at all on yugo flats.

Not to start an argument, but I bent my Yugo underfolders with this.
I don't remember whose flats, but the top rails were prebent.

Yeah considering I just had it a month ago, it is getting more beating

Updated the list in psot one

They looked that bad when I got them - so I replaced the bottom piece that holds down the flat with new steel stock.

will you all quit beating this shit with a hammer, goddamn knuckle draggers,:shaking:

hey NC, be on the look out for braxtons Jig... sending it out this week.

I could have it re shipped out within 48 hours of receiving it.


And I won't use a gdamned hammer:shaking:

Not to start an argument, but I bent my Yugo underfolders with this.
I don't remember whose flats, but the top rails were prebent.

I should have clarified. Yes, I did mine with it too, but it doesn't get it close to square. Every yugo I've seen done in a regular jig comes out with a bowed bottom, which isn't acceptable, IMHO. It also leaves a nice gap between the bottom of the trunnion and the receiver.

As far as I'm concerned, the bent receivers I have are garbage. Hopefully the yugo jig will make a square receiver with a flat bottom, it not, I guess I'll get a Nodak Spud receiver.

braxtons did the same thing (DPH arms jig) on the first one we did. i ended up resetting the sides that are held with the counter sunk allen screws to "down" before pressing again. it netted very straight and accurate bends. i wanted to drill all the way thru it w/ a 3/8 hole and pin it w/ some stainless rod or something, but its not my jig so its not my place to modify someone elses shit.....

but thats how i would fix it from shifting. the countersunk screws even though are accurately placed shift when pressure is applied in the press.

I should have clarified. Yes, I did mine with it too, but it doesn't get it close to square. Every yugo I've seen done in a regular jig comes out with a bowed bottom, which isn't acceptable, IMHO. It also leaves a nice gap between the bottom of the trunnion and the receiver.

As far as I'm concerned, the bent receivers I have are garbage. Hopefully the yugo jig will make a square receiver with a flat bottom, it not, I guess I'll get a Nodak Spud receiver.

huh

I do not see any diference between any I have bent. But I find all bents have a small amount of bow in the base.

I'm welding up a secondary jig that will be used after it's bent in the yugo jig. Remove the screws and the strap that holds the flat, and press it in the other jig with a bottom on it to hopefully square it all up, we'll see. We have some misdrilled flats left to play with. I was hoping it would square up with the right jig. Oh well, worst comes to worst, I'll order a 100% one.

Drm
Lt1CJ
Doc
RedDwarf
mo
4x401cj
Prohibited
MudSoup
________
^^ Done

PonyDriver <--PM'd, no need
NCToy76<--PM'd, read after that Braxton's jig is inbound

vv Need
_________

Ben Segrest <--PM'd
ItsaCJ6
Mister Fubar
Agro
SinisterTrucker
TempestMan
YardDog

Used press, worked fine.

NCtoy76 is inbound via me. take him (and me if im on there) off the list.

Replied

Any updates? Was this shipped again?

Woohoo, I'm getting closer.

I have Pete's. There are no locating pins that came with it. should I use some roll pins or drill stock or? Also, the bottom piece that DRM replaced has a pretty good bow in it. Would it be okay to replace that with 3/8" or does it need to be 1/4" for some reason?

i never supplied pins. Myself just used two 1/8" drill bits.

The bow shouldn't matter. Tighten down all four bolts and the flat shouldn't move.
P

When I got the unit from DRM it had two 1/8" cotter pins tied together with string for the locating pins.

Yeah, I added the pins as a convenience to the next guy.

Yeah, I added the pins as a convenience to the next guy.

They are still hanging off my press :emb:

They are still hanging off my press :emb:

Well the aren't doing much good to the next guy hanging there, are they? :p

Braxton's jig should be sitting on my doorstep.

Who's next in line? I should be able to press my flats out this weekend.

Braxton's jig is on it's way to Aggro, you can scratch my name off the list.

Now who wants to buy a kit that I don't feel like finishing? :flipoff2:

wow so just three more people

Braxton's jig is on it's way to Aggro, you can scratch my name off the list.

Now who wants to buy a kit that I don't feel like finishing? :flipoff2:

PM Me a price

Scratch me off the list...

Down to 2.

PM Me a price

I've got a standing offer from a guy at work for 300, so if I decided to sell it I'll probably put it on Arfcom for 500 and let someone talk me down a little so they think they are getting a deal. :laughing:

If I get it in the next month or two that would awesome timing fom me.

wow so just three more people

Lots of progress since I last lurked on this thread. Hell, add me to the list, I have three flats left that I need to complete.

Braxton's jig is on it's way to Aggro, you can scratch my name off the list.

Now who wants to buy a kit that I don't feel like finishing? :flipoff2:

I figure I'll answer all 47 of the PM's here.

If I decide to sell any AK parts kits or any other gun crap I'll throw it up in the for sale section and put a link in the for sale post.

Thanks for playing. :D

Braxton's jig is on it's way to Aggro, you can scratch my name off the list.




Braxton's jig is now enroute to tempestman, you can scratch my name off the list.

I received Braxrons jig today. I'll send a pm when im done with it. Whos next YardDog?

Looks like Charles Martel wants it after Yard Dog. I would like to be put on the list too.

Braxton's jig is now enroute to tempestman, you can scratch my name off the list.

I never got a PM for an Addy? what happened?

I have Pete's.
I received Braxrons jig today

Drm
Lt1CJ
Doc
RedDwarf
mo
4x401cj
Prohibited
MudSoup
PonyDriver
NCToy76
Ben Segrest<- Has One??
ItsaCJ6 <- was skipped???
Mister Fubar
Agro
SinisterTrucker
TempestMan<-- has one??
RockKiller

Is this correct?

if so ben send mine to Itsa. Itsa return to me when done.
Tempest send braxtons to Rock, Rock return to Braxton when done.

I pm'd people until I found somebody who wanted it (going down the list)
If I got no reply for a week I moved on
dunno?

Yep, I borrowed another one so I don't need it any more.

I pm'd people until I found somebody who wanted it (going down the list)
If I got no reply for a week I moved on
dunno?

Well if ya PM'd me, ya spelled it wrong or something:D, I did not get one from you.But Ben should have PM'd me, not you.

Anyone happen to know where my jig is? :flipoff2:

Braxton's jig is now enroute to tempestman, you can scratch my name off the list.

I received Braxrons jig today. I'll send a pm when im done with it. Whos next YardDog?

^^

How about my two jigs?

So WTF has my jigs?

PonyDriver
NCToy76
Ben Segrest<- Has One??
ItsaCJ6 <- was skipped???
Mister Fubar
Agro
SinisterTrucker
TempestMan<-- has one??
RockKiller

This is one reason I don't like loaning tools, even to friends. :(

I hope you people didn't dick this up I still have lowers to bend here.

So WTF has my jigs?

NCToy76
Ben Segrest<- Has One??
ItsaCJ6 <- was skipped???
Mister Fubar
Agro
SinisterTrucker
TempestMan<-- has one??
RockKiller

Two people on the above list where the last two that had my jigs. You either have them or sent them to someone

btt

I am sure they will show eventually...

Well its been 4 months since I thought I knew where they were.
Figured it's not too hard for someone to say "I got it"

I have one. Does it need to go to Itsa, or?

I have one. Does it need to go to Itsa, or?

Thank you, shoot him a PM. If he want's it yes, other wise send it to me.

Looks like the other one might be with
4x401cj
PM sent to him

4x401cj<--sent it on
Prohibited
MudSoup
PonyDriver
NCToy76
Ben Segrest<- Has One
ItsaCJ6
Mister Fubar
Agro
SinisterTrucker
TempestMan
RockKiller
401CJ sent it on, doesn't remember to whome

Prohibited?

401CJ sent it on, doesn't remember to whom.

Sorry to hear that.

401CJ sent it on, doesn't remember to whome

Prohibited?

sounds like 401cj owes you for a jig

No one ever sent me one or contacted me, just so you know it never made it that far down the list

sounds like 401cj owes you for a jig

Sorry, I didn't mean for it to sound that way. he sent it on, posted in this thread that it went to Prohibited, who said he sent it to mudsoup.

So I have PMed them

Sorry, I didn't mean for it to sound that way. he sent it on, posted in this thread that it went to Prohibited, who said he sent it to mudsoup.

So I have PMed them

just yanking peoples leg. I think its cool that your letting it float around, just dont want to see it spoiled for when I need it :)

401CJ sent it on, doesn't remember to whome

Prohibited?

I got it from 401 and sent it to Mud soup. I returned your pm Pete.

ok both mine are accounted for.

Does anyone still need one?

I still need one. and dont worry, I have a press.

Also, if theres anyone in the area that needs to bend some up they could do it at my house

I'm gonna be grabbing a few flats on my next paycheck so I could use one. I have a press...

ok both mine are accounted for.

Does anyone still need one?


Mine's in there somewhere too. Don't be thieving my jig pete. :flipoff2:

I'm in the same boat as you though. Still have a kit I would like to eventually use but haven't heard the status of my dph jig in half a year either. Thanks for bringing it back up.

i got brakton357 gig from halogrinder and sent it to sinistertrucker, sry 4 late reply lost internet for awhile. yes iam drunk:flipoff2:

hey guys, im new to the posting etc stuff. but wondering what i need to do to rent/borrow an ak jig? also i have an 88 sammi, 87 wrangler, 2 98 4runners and a 95 tacoma yard truck for swap/sale. Thanks, Josh M .110 howard st. Northboro, MA. 01532. hope to hear from you, Thanks for any help/ideas. Josh. 508-868-4848

Pete

I could use one of your jigs. Address in your PMs.

I havent actually received any of them yet

So does anyone have a m70 jig or should I buy one so I loan it out? :smokin:

So does anyone have a m70 jig or should I buy one so I loan it out? :smokin:

M70's are milled...

Still don't have my jigs back :(

Same here. Thought of this the other day and almost didnt lend my trans jack out because of it. Lesson learned I guess.

M70's are milled...

Flats are available for these.