: 3.4l 5vz-fe Complete Engine packages
RanchoToytrucks 12-27-2007, 10:31 AM I have a few COMPLETE 3.4l engines here at my shop.
They are out of wrecked Trucks and 4Runners
Mileage ranges from mid 70k to 130k.
All are ran and tested, I even have a few that are still in the trucks in running form.
I am going to be selling them as complete swap engines, which means I am going to pull EVERYTHING you would need from the donor truck to do the swap.
All accessories, computers, harnesses, manifolds, sensors and smog parts i.e. crossover, EVAP canister, air box and tube.
$1800 for an engine that came from a A/T truck
$2200 for an engine that came from a M/T truck
These prices are with your 10% discount
They come with a 6 month warranty
and shipping is between $200 and $300 to anywhere in the lower 48 states
depending how far you are from a main hub.
We take all major credit cards, paypal, and cash.
Let me know!!
Thanks guys!!
J Kimmel 12-28-2007, 07:14 AM thats a good deal!
pickeledpigsfeet 01-05-2008, 10:42 AM how much to add a v6 5spd tranny without tcase to the deal(for guys with 22re stock)?
how about a package for a 2.7?
RanchoToytrucks 01-10-2008, 01:40 PM Pm sent.
Thanks!
RanchoToytrucks 01-16-2008, 01:59 PM I have one out, cleaned prepped and ready to go!!
dirtchicken 01-22-2008, 07:31 PM How much for one with shipping to 96734? I already have the R150 in the truck.
RanchoToytrucks 01-23-2008, 10:26 AM How much for one with shipping to 96734? I already have the R150 in the truck.
Hawaii!! Can I ride the pallet over there with it!!:D
It would be $2500 shipped to your door
Yes I can ship it to you no problem, but its pretty expensive
it is $895.50 just for shipping. Unless you know of a carrier that is better you can use the info below and see if there is another way to get it there.
Just for reference a fully dressed 5VZ-FE on a pallet with all of the other swap parts weights in at 553lbs and the size of the pallet is 48"x48"x42"
For $1700 Here is how it comes ready to go in
http://a495.ac-images.myspacecdn.com/images01/5/l_a6860d00b12d835ea7f86bd23e5388a6.jpg
LOOK MA' NO RUST!!
http://a850.ac-images.myspacecdn.com/images01/119/l_22bcc2d45045fb5a95bd136afc8ef6a9.jpg
Also not shown are the air box, down pipe, intake tube, and evap canister.
They come in another box so they don't get damaged.
dirtchicken 01-23-2008, 01:33 PM I used Hawaiian Ocean Transport when I had my Marlin Crawler SAS kit shipped. Let me do some homework and I'll get back to you. Mahalo nui loa!:flipoff2:
RanchoToytrucks 01-23-2008, 05:34 PM I used Hawaiian Ocean Transport when I had my Marlin Crawler SAS kit shipped. Let me do some homework and I'll get back to you. Mahalo nui loa!:flipoff2:
Yea my freight carrier is by air, ocean freight I would be way cheaper
RanchoToytrucks 02-06-2008, 03:40 PM Update, I can't believe how fast these are flying out of here!!!
I just had to buy some more trucks at the auction to fill a few orders.
Just got in two M/T 3.4l 4Runners and two A/T Taco's
yoda0395 02-06-2008, 07:08 PM Have any 1uz-fe setups.
RanchoToytrucks 02-11-2008, 12:10 PM Have any 1uz-fe setups.
No we only do Toyota trucks, those came in LS400's all through the early to mid 90's
The 5VZ is a much eaiser swap to get going.
NoBrainR 02-11-2008, 12:59 PM PM me a price on a 3.4 w/auto (including the auto) and no shipping. I live in Sparks (Reno) and I'm sure my wife would jump at the chance to go shopping :D
81_4xToy 02-18-2008, 08:56 PM I'm interested in a 3rz swap. does the $1200 quote in your sig include the bellhousing? I assume the shipping is the same for this package?
RanchoToytrucks 02-19-2008, 10:11 AM If you want the bell housing add another $100
I have one in stock,
shipping on the 3rz's is $150 to anywhere in the lower 48 states
Thanks!!
davidmachine 03-09-2008, 12:35 PM Hi
I´m looking for a 3.4 engine for my old 3VZ 4Runner MT
I Know it seems strange but, will you send it to Spain?
I´d like to know shipping cost to Madrid, Spain. I´m not in a hurry so I can wait for an ocean shipping that I suppose will be cheapest way
Regards
David
RanchoToytrucks 03-11-2008, 09:07 AM Hey David, We do ship world wide.
I will get you a few shipping, quotes and PM you with them,
Thanks!
BigIsland4x4 03-15-2008, 03:17 AM any possibilty of buying just the ecu+wiring harness for a 98 M/T 5vz?. Lmk, thanks!
zachv 03-20-2008, 05:31 PM For a non-Toyota guy like myself, how hard are these to get running in a buggy? Is there a kit out there to make it a 3-5 wire hookup?
RanchoToytrucks 03-20-2008, 06:06 PM For a non-Toyota guy like myself, how hard are these to get running in a buggy? Is there a kit out there to make it a 3-5 wire hookup?
Zach I send all of my customers to ORS (Off Road Solutions) for wiring harnesses, they do sell a stand alone buggy harness that is a 5 wire hook up.
Also if you want I can cut the harness ends off of the donor truck if you chose to wire it up on your own at no extra charge.
Ryan31783 04-24-2008, 05:54 PM could you PM me a price for a M/T 5vz? zip 84720, I would need everything ...also mileage, model year, and results from compression/leakdown if you have them?
j81hatala 05-01-2008, 11:35 AM Can i get price quote for 5vz-fe and r150 trans. my parents will be able to pick up i am currently in korea and will need it for swap in sept.
jeff
RanchoToytrucks 05-01-2008, 03:16 PM The price is $2800 for a complete take out MT changeover with the r150f trans and transfercase.
Do you need a r150 from a 3rd gen truck or one from a Tacoma?
Let me know
Thanks!!
j81hatala 05-01-2008, 11:20 PM I am not sure what one i need. it is going in an 84 pickup. i dont need transfer case eather.
seafarinman 05-19-2008, 04:32 PM Looking for an oil pan from a 2WD T-100 with 3RZ-FE engine for 2RZ-FE swap into my SAS 94 pickup. How much? Thanks.
RanchoToytrucks 05-19-2008, 05:01 PM No pans in yet, I sold a 3rz t100 engine a few weeks ago and I have yet to get the core back yet, I will keep you posted when I get it back
Thanks!!!
j0mpst0rt 05-27-2008, 11:26 AM OK,
I am here because I am sourcing parts for my Toyota Landcruiser I bought in the UK, in August, 2007. It was a bargain. And of course, there's a reason for a bargain. When brought over here in 2000, the fuel tank was removed, the fuel pipework was removed and an LPG only system was installed, called a Bazuin Autogas system.
I have two LPG tanks, and about to add a third.
I MUST obtain the following:
I need a replacement Air box as the other one has been blown up by the LPG.
I also WANT the following:
Original Petrol Tank.
Original pipework from Petrol Tank to petrol intake point (where you fill it up).
Original petrol pipework and bits to engine.
All the Toyota Pipes for the engine.
and whilst at it, the suspension, brushes, and Vbits.
And so I want to have all of it brought over here for my mechanic to install. Because Toyota over here in the UK just look at the car with a total blank alienated look cos the engine parts are all the wrong way round. And as its an australian import, not an japan import, they cannot get a catalogue for the australian import.
So if someone can provide the above. i'd be grateful with money and a thankful feeling in my heart.
Thankyou in advance.
Michael Bennett, Croydon, UK.
wildjerseyfirefighte 06-09-2008, 11:16 PM can I get a total on a complete motor trans transfer case and harness, basically everything needed to just swap it into my 89 4runnwr to 08753? Please pm me since I'm not on here much thanks
RanchoToytrucks 06-16-2008, 10:34 AM Pm sent,
Thanks!
| |