of the trigger group assem. on an AK. Specifically the spring location.

Never seen one and I'm not sure about the long legged,3 wrap skinny spring. I can't "SEE" how it goes.

I've spent a long time searching on the net but what I need is not coming up


Thanks

Someone posted one earlier. I think its in the AK thread. Maybe they will chime in.

of the trigger group assem. on an AK. Specifically the spring location.

Never seen one and I'm not sure about the long legged,3 wrap skinny spring. I can't "SEE" how it goes.

I've spent a long time searching on the net but what I need is not coming up


Thanks
umm that spring is not needed. its a full auto part. you need just:
the hammer/trigger spring (the twisted one that goes around both sides of the hammer with the legs that go to the trigger)
the disconnector spring (the "normal" looking one)

the one I think you are talking about is the "shepherds crook" and you have to cut it to use it to hold the axis pins in place. use "E" or hairpin clips from lowes/home depot to hold the axis pins in place.

Thanks guys. I found it on Page 14. Pete had posted it

Thanks guys. I found it on Page 14. Pete had posted it

what spring was it?

Dug through my box-o-parts to come up with this. Use as a reference. These are all import parts from various rifles.


http://img120.imageshack.us/img120/5396/aktriggerpartsyg3.jpg (http://imageshack.us)

actually...what you have listed as the "sear spring" goes on the "rate reducer" and the "axis pin retainer" doubles as the "sear spring"...

actually...what you have listed as the "sear spring" goes on the "rate reducer" and the "axis pin retainer" doubles as the "sear spring"...



cool.. couldn't remember how it went together. I'll update it..

like this sorta...LOL...

what spring was it?



I was looking at/asking about the Axis Pin Retainer spring.
this pic is what I needed