|
Shaker 06-30-2002, 09:33 AM Looking for a bracket to mount my york to my 83 Blazer. Give me some pics to get a few ideas. Do you know anyone who makes any if the $$$ is right I'll get one. Thanks guys......Tim :beer: :beer: :D Charly 06-30-2002, 09:59 AM Kilby at www.onboardair.com has some for SBCs, not sure if it's just for TBI and newer though. Also, I've found them on some vans that had auxliary AC from GM. ForestCam 06-30-2002, 01:01 PM Find an aftermarket AC installation shop in your area and give 'em a call. If I remember right quite a few aftermarket AC set ups use York compressors. Shaker 06-30-2002, 01:15 PM Originally posted by Charly Kilby at www.onboardair.com has some for SBCs, not sure if it's just for TBI and newer though. Also, I've found them on some vans that had auxliary AC from GM. Yeah I'll call Kilby on Mon. Any guess on what year vans to look at? THANKS........Tim TPIJeep 06-30-2002, 06:29 PM I posted this a month ago when I got done with mine, not real hard at all to build and very sturdy.. http://www.tpijeep.com/P1010275.JPG Here is a link to SEVERAL other shots... (http://www.tpijeep.com/York.htm) Hope this helps... Don't look at the welds, try welding after your buddy welds the tip solid to the workpiece.... :D reddwarf 06-30-2002, 09:37 PM Eeewwwww, look at those welds!!!:flipoff2: Charly 07-01-2002, 04:04 AM Looked like 80s vans, maybe even some late 70's.....all seemed to be window vans, and one appeared to be a high top short bus used by a municipality. arndog 07-01-2002, 05:42 AM here is my disaster Erik D_lux 07-01-2002, 02:49 PM Arndog how did you clear the thermostat housing? POPE 07-01-2002, 03:41 PM Hey shaker. I've got a bracket that came off an aftermarket AC setup for SBC's sitting in the garage. It's gonna be a while before I can use it so if you want, I can send it too you to use as a mockup or template. It mounts the compressor up high on the drivers side. Basically where the alternator is on mine. Lemme know harkinoff 07-03-2002, 07:12 PM I found my york setup on a 1/2 ton chev pickup on a 350, it has FEMSA made in spain on it, thats the only markings, sorry about the pic, :D Shaker 07-04-2002, 06:56 AM Originally posted by POPE Hey shaker. I've got a bracket that came off an aftermarket AC setup for SBC's sitting in the garage. It's gonna be a while before I can use it so if you want, I can send it too you to use as a mockup or template. It mounts the compressor up high on the drivers side. Basically where the alternator is on mine. Lemme know Yeah That would be great......My altenator is on the pass. side so I think I could make it if I had something to look at. I'll PM you my address......Thanks-Tim Shaker 07-05-2002, 05:28 AM Originally posted by POPE Hey shaker. I've got a bracket that came off an aftermarket AC setup for SBC's sitting in the garage. It's gonna be a while before I can use it so if you want, I can send it too you to use as a mockup or template. It mounts the compressor up high on the drivers side. Basically where the alternator is on mine. Lemme know e-mail me at cfryer9968@cox.net the PM is screwing up...:rolleyes: | |