i'm in the middle of trying to wire up the harrness of a Mid to late 80s 350TPI fuel injection system off of either a Camaro or Vette and i need to find a good wire diagram to go off of to finish my buggy so i can go wheel! (i'm starting to get the shakes from lack of wheeling) please HELP and yes i searched google and this board and haven't found what i need. so if you have used one or know someone has used or has one let me know?! Thanks

if you can get ahold of a chiltons it will work. ive wired 2 tpi motors using this book and suncoast conversions manual.the suncoast manual tells you how to delete certain circuit and not need reprograming. they also give you the pinouts for the ecm. they help alot.if you can wait a few days i can copy the suncoast manual and mail one to you.pm me your address

here you go. If you want the hard copys let me know.

more

These are what i used for mine. 92 TPI. I got them from some cararo site but i dont remember which one.

These are what i used for mine. 92 TPI. I got them from some cararo site but i dont remember which one.

all the pages above are in the suncoast manual, and alot more. agood site to go onto is thirdgen.org .

cool thanks guys i hate dealing with wiring

In the long run I ended up just buying a harness though. However I did use the factory for a couple years. I just didnt like how long the wires were.

inau99 i just saw the wiring daigrams you had here i was wondering if you could email those to me thanks steve. sclose55@yahoo.com