hey, I have a no name 30A plasma cutter. yeah it's cheap but it works. The power switch is busted, thankfully in the ON position. I can't find a replacement.

on one side it says:

KENDE KCD-25

on the other side it says:

AC-21A 25A 250V

It's a rocker switch, rectangular shaped. About 1" wide and 1.25" tall.

I'm normally the Google master but I'm coming up empty. Anybody got a good source for electronic parts?

thanks.

take it apart and put any type of little switch on it, it doesn't have to be anything fancy, just so it works

x2
Got a Radio Shack? I bet you can find a similar replacement pretty easily.

or del city?
http://www.delcity.net/delcity/servlet/catalog?category=Switches&page=1

I've got the switch out and looked at Rad Shack but they don't have anything similar. The switch has 6 connections on the back.

Two are the 220 IN
Two are the 220 going out to the machine.
Two small wires go to the cooling fan.

I can't find anything like this.

I've got the switch out and looked at Rad Shack but they don't have anything similar. The switch has 6 connections on the back.

Two are the 220 IN
Two are the 220 going out to the machine.
Two small wires go to the cooling fan.

I can't find anything like this.

Give me a call. I think I might have what you need.

Phil Jr.

Give me a call. I think I might have what you need.

Phil Jr.

How cool is that...it's not even his brand:smokin::grinpimp:

How cool is that...it's not even his brand:smokin::grinpimp:


X2, Bought my plasma from phil and over a year later it still cuts like brand new, good guy

Hack maybe, but mine does the same thing. I just turn it off by unplugging it and have been doing this for a while (2 years?) now.

Hack maybe, but mine does the same thing. I just turn it off by unplugging it and have been doing this for a while (2 years?) now.

Is it one of our machines?

Is it one of our machines?

No sir. I wish it had been, you came around too late. :flipoff2:

morpheus

Did the switch work?