: YJ steering wheel disconnect


SPOA87YJ
01-11-2008, 10:17 AM
I need to order a pinless hub for my steering wheel disconnect and can't get my hands on my rig for a while. I need to determine if the shaft is 3/4 or 5/8. Will be going on an '87.

Searched and found some things about different hubs but nothing on shaft size??

Rubicrawler
01-11-2008, 10:34 AM
IIRC my '91 was 3/4". I eventually pulled the stock column (should have done this in the first place) and went with a 3/4" tube and u-joint assy from Day Motorsports and was able to reuse my quick disconnect.

edit: http://www.daymotorsports.com/product/357/ Great service and delivery!

HokieYJ
01-11-2008, 01:11 PM
The YJ shaft is a 36 spline GM shaft. A Grant #3001 is a direct bolt on to a stock yj column. I'm running one in my YJ.

http://i38.photobucket.com/albums/e102/boomboom33/Jeep%20Pics/P1000355.jpg
http://i38.photobucket.com/albums/e102/boomboom33/Jeep%20Pics/P1000356.jpg
http://i38.photobucket.com/albums/e102/boomboom33/Jeep%20Pics/P1000357.jpg

PolarYJ
01-11-2008, 01:19 PM
The YJ shaft is a 36 spline GM shaft. A Grant #3001 is a direct bolt on to a stock yj column. I'm running one in my YJ.

http://i38.photobucket.com/albums/e102/boomboom33/Jeep%20Pics/P1000355.jpg
http://i38.photobucket.com/albums/e102/boomboom33/Jeep%20Pics/P1000356.jpg
http://i38.photobucket.com/albums/e102/boomboom33/Jeep%20Pics/P1000357.jpg

where'd ya pick that up from? did ya find a good price?

HokieYJ
01-11-2008, 01:23 PM
I got it from Summit it was $130 or so. A little pricey I guess, but it seems to be a good quality piece.

http://store.summitracing.com/partdetail.asp?autofilter=1&part=GRT%2D3001&N=700+115&autoview=sku

SPOA87YJ
01-11-2008, 02:01 PM
Cool, thanks for the good info. Looks like just the pinless hub is $170 by itself. Not trying to skimp out here, but that is way out of my price range. I've found numerous other hubs ranging from $20-$80 that seem to be of equal quality but only specify 3/4 or 5/8. Does anyone have a concrete measurement on their shaft?

HokieYJ
01-11-2008, 02:03 PM
I'm 99% sure it's a 3/4" shaft. The thread on the end of the shaft is a 5/8" thread.

Rubicrawler
01-11-2008, 02:11 PM
Stock is a 3/4" 36 spline. Same as a Chevy column ;)

backyard wrenchers
01-11-2008, 02:20 PM
this is the same as above, the grant disconnect

http://i146.photobucket.com/albums/r249/Grason88/img_0250.jpg
http://i146.photobucket.com/albums/r249/Grason88/img_0252.jpg
http://i146.photobucket.com/albums/r249/Grason88/img_0251.jpg


:D

SPOA87YJ
01-11-2008, 02:57 PM
Thanks guys! :smokin: