Anyone happen to know of a donor that will work with minimal fuss?

I have an 18" mechanical flex fan on my 79 350 and I need a shroud.

http://www.imagestation.com/picture/sraid24/p41df9a3e74499622877c2ad32392c9db/fd992f7b.jpg

not sure if you have enough room to do this but i just used some sheetmetal and zip ties

Vintage Air has about anything you want and plenty reasonable. You just send them your measurements and they send you a blank shroud made of polyethelyne. You fit it up and cut the hole where the fan is. They are the hot rod heat and air guys. The nice part about their deal is it tapers from the radiator to the fan opening so you have full cooling capacity.

I'll give Vintage Air a call tomorrow to find out what they have.

Thanks!