okay here it goes

93 jeep wrangler sahara

custom full roll cage

fullsize dana 44 front with 4.10's welded with warn premium hubs 8 bolt

Rear is a FF Dana 60 with 4.10s and factory sure grip with rear disk brake conversion

3x5x.250 tubing rear bumper with a rear winch plate just need to drill the holes for the winch bolt pattern

Frame is from a 87 that was sandblasted and plated from front to back with 1/4" steel plate and sealed with expoy primer and panted with tremclad

Body was installed on a daystar 1" bodylift new mount comination

engine is a dodge 360 magnum with the fuel injection still intact,

Block hugger headers with 3" exhuast and series 50 knock off muffler with cat.

Trans is a nv3550 with a dana 300 transfer case

Front suspension is a custom 3-link with dual radius arms set up and tj coil springs and rough country nitro shocks

Front lowers are 21/4 " x3/8 dom tubing with 11/4 Qa1 heims at the frame end and bushings at the axle end

Front upper links are 2"x.250 dom tubing with left and right 7/8 Qa1 heims

Rear suspension is a triangulated 4 link with Tj coils and roughcounty nitro shocks

Rear lowers and uppers are made from 2"x.250 wall dom tubing with 7/8 QA1 heims the uppers have left and right heims for adjustment.

Jeep rides on 37 " boggers the front 2 are about 50 percent tread and the rears are about 80 percent tread on 8 bolt rockcrawler style rims

Front tube fenders are custom made from 1" hrew tubing and 14 guage steel sides and tops

The steering box and pump are set up for hydro assist it just needs the ram.

There is a lot more to this rig it needs a couple odds and ends finish and would be well worth the money.

SEROIUS inquires only please, i can send more pics by email to those interested.

Here are a couple for starters two finished in the driveway and one in the shop during finall assembly this jeep was completly stripped and rebuilt

http://i66.photobucket.com/albums/h254/littlejeepr/Jeep%20project%20restore/IM002674.jpg

http://i66.photobucket.com/albums/h254/littlejeepr/Jeep%20project%20restore/IM002673.jpg

http://i66.photobucket.com/albums/h254/littlejeepr/Jeep%20project%20restore/Aug08_0002.jpg

8500,00 or best offer

almostforgot the jeep is located in windsor ontario canada, i maybe able to bring it upto 200 miles for a small fee.

ttt anyone? even remotly interested

Can you send more pics and specs to bbartlett@yousq.net Thanks

I'm just getting my puter back up and running i'll send them soon

pics sent let me know if you didn't get them

Last bump, jeep is going to go in for the body work it needs and paint, plus a fuel cell. I'm still up for offers before i sink another 1500 to 2000 bucks in it

Jeep is now complete with a front bumper need to have a winch if you have one bolted to it, fuel tank is in, hydro assist is done. Jeep is complete except for paint.

Please no trades, partial trade and cash I may consider, I would prefer cash since I need the loot to put into the business that I am starting.

5800 US FIRM

it also has a hard top that is on it for the winter.

bump