Way tooooooo lazy to pull it just to measure. :flipoff2:

Anybody know the length of the long side inner shaft on a 78-9 F250 D44? :beer:

34.75" from tip of splines to center of u-joint. That's just for the inner shaft without the stub.

33.91" is for an F150, not 250.

J. J.

That used to be on Warns site. All the axel sizes are gone. Bummer:(

Originally posted by CJ
That used to be on Warns site. All the axel sizes are gone. Bummer:( Try Copy and paste when you find something good. Remember, nothing on the internet last for long. Below has some wrong info, but it's copy and past so take it for what it is.

FORD INNER AXLE SHAFTS
'67-71 Ford Bronco (left)

Length: 18.44
Splines: 27

U-Joint: 297X
PN 38806
'67-71 Ford Bronco (right)

Length: 28.06
Splines: 27

U-Joint: 297X
PN 38807
'71-77 Ford Bronco (left)

Length: 18.31
Splines: 30

U-Joint: 297X
PN 38809
'71-77 Ford Bronco (right)

Length: 27.94
Splines: 30

U-Joint: 297X
PN 38810
'68-79 Ford Pickup, Full Size Bronco (right)

Length: 33.91
Splines: 30

U-Joint: 297X
PN 39144
'68-79 Ford Pickup, Full Size Bronco (left)

Length: 18.91
Splines: 30

U-Joint: 297X
PN 39143
'71-80 Ford Pickup, Full Size Bronco (right)

Length: 33.91
Splines: 30

U-Joint: 297X
PN 39144
'71-80 Ford Pickup, Full Size Bronco (left)

Length: 18.91
Splines: 30

U-Joint: 297X
PN 39143
INTERNATIONAL SCOUT II INNER AXLE SHAFTS
'71-80 InternationalScout II (left)

Length: 32.91
Splines: 30

U-Joint: 297X
PN 38790
'71-80 InternationalScout II (right)

Length: 14.78
Splines: 30

U-Joint: 297X
PN 38808
JEEP INNER AXLE SHAFTS
'72-81 Jeep CJ (left)
Length: 27.01
Splines: 27

U-Joint: 297X
PN 38789
'72-81 Jeep CJ (right)
Length: 14.14
Splines: 27

U-Joint: 297X
PN 38803
'82-86 Jeep CJ7 (left)
Length: 28.69
Splines: 27

U-Joint: 297X
PN 38804
'82-86 Jeep CJ7 (right)
Length: 15.82
Splines: 27

U-Joint: 297X
PN 38805
'74-79 Jeep Wagoneer (left)
Length: 33.19
Splines: 30

U-Joint: 297X
PN 39339
'74-79 Jeep Wagoneer (right)
Length: 14.69
Splines: 30

U-Joint: 297X
PN 38808
'80-84 Jeep Wagoneer (left)
Length: 32.12
Splines: 30

U-Joint: 297X
PN 39461
'80-84 Jeep Wagoneer (right)
Length:
15.8
Splines: 30

U-Joint: 297X
PN 39459
'87+ Jeep Wrangler (left)
Length: 16.63
Splines: 27

U-Joint: 297X
PN 38821
'87+ Jeep Wrangler (right)
Length: 32.25
Splines: 27

U-Joint: 297X
PN 38875
Inner Blank Footnote:1
Length: 22.00
Splines: Blank

U-Joint: 297X
PN 61553
Inner Blank Footnote:1
Length: 36.25
Splines: Blank

U-Joint: 297X
PN 61554
CHEVROLET OUTER AXLE SHAFTS
'73-87 Chevy K–10, BlazerLength:
9.94
Splines: 19

U-Joint:
297X
38815
FORD OUTER AXLE SHAFTS
'71-79 Ford Bronco, F–150Length:
9.72
Splines: 19

U-Joint:
297X
PN 38816
JEEP OUTER AXLE SHAFTS
'72-86 JeepCJ/Scout II
Length:
8.72
Splines: 27

U-Joint: 297X
PN 39105
'72-86 JeepCJ/Scout II Footnote:3
Length:
8.72
Splines: 30

U-Joint: 297X
PN 38248
'74-83 Jeep Wagoneer (Disk Brake)
Length:
9.94
Splines: 19

U-Joint: 297X
PN 38815
'74-76 Jeep Wagoneer (Drum Brake)
Length:
9.72
Splines: 19

U-Joint: 297X
PN 38816
'87-94 Jeep Wrangler Footnote:2
Length:
8.31
Splines: 27

U-Joint: 297X
PN 39098
'95+ Jeep Wrangler Footnote:2
Length:
8.31
Splines: 27

U-Joint: 297X
PN 37774

Originally posted by CJ
That used to be on Warns site. All the axel sizes are gone. Bummer:(
Just thought you may want to know. Go to the Warn site,http://www.warn.com. Click on About Us, then click on Literature, You will get to a page that has Adobe PDF files, scroll down 9 .pdf links. This should be the the axle.pdf files, 6 pages, and it has the measurements you want.
Now you can :) and go have a :beer: , :smokin: , or whatever, and copy/download the files. Andy

Gracias :beer:

ya, you need them keith. i've seen you drive!:flipoff2:

Originally posted by FULLSIZE
ya, you need them keith. i've seen you drive!:flipoff2:

Hmmmmmmm, what length are your spare long sides Brian???? :flipoff2:

i'd offer 'em up but i think i'll be needing them this weekend.:D

to bring this back.....that warn list doesnt show the fullsize Ford trucks, f250 and 350. Anybody know where I can find all those measurments?

Originally posted by Keith Strong
to bring this back.....that warn list doesnt show the fullsize Ford trucks, f250 and 350. Anybody know where I can find all those measurments?

Anybody? :(

Nope, but I had the shafts out of my new '78 F-250 Dana 44 last weekend, and I confirm the 34.75" mentioned above, the short side I got between 18.625 and 18.6875 (it was dark and without a joint in is tough to get dead on) I sure wish someone (hint to all PBBer's) wuold assemble a Dana 44 axle length chart that was complete, not just the ones Warn thinks they need to list.

Seems to me these are the Dana 44 lengths that are missing

Jeep J-trucks, passenger drop and driver's drop
Ford leaf sprung trucks - F-250's (are the HP's and LP's the same? Or the leaf sprung F-150's?)
Every Dodge
Zamboni's (Okay, those are probably custom)

Can anyone else think of an open knuckle Dana 44 application that's not in the Warn chart? Whose got what and what does it measure?

4Bangler, I was just thinking of putting up a web database where you could enter an axle type, vehicle it came from, short length, long length, wall thickness and all that crap. This would be for every size, not just 44's, but 60's, and all that jazz. Hmmm, with a POR request maybe I'll get off my ass and do it.

Originally posted by Savage
4Bangler, I was just thinking of putting up a web database where you could enter an axle type, vehicle it came from, short length, long length, wall thickness and all that crap. This would be for every size, not just 44's, but 60's, and all that jazz. Hmmm, with a POR request maybe I'll get off my ass and do it.

hey Newbie.....wanna be my firend??? ;) :flipoff2: That would be sweet man! keep us informed


Bang Boy.....gracias.... I needed that short side length too ;)

Originally posted by Keith Strong


hey Newbie.....wanna be my firend??? ;) :flipoff2: That would be sweet man! keep us informed


Bang Boy.....gracias.... I needed that short side length too ;)

I've been around long enough that I don't want you as my friend! :eek: :flipoff2: Just kidding, Keith.

I created a new thread under General for this...

http://www.pirate4x4.com/forum/showthread.php?s=&threadid=82475

easy to measure without pulling.

Hook a tape measure to the "C" of the inner knucke, measure to the center of the two vertical bolts on the cover, and add 3.75".:rolleyes:

Originally posted by Savage


I've been around long enough that I don't want you as my friend! :eek: :flipoff2: Just kidding, Keith.



:flipoff2: :p

Thanks Keith, I didnt know that :beer:

I am getting no help from the Gen Forum. Anyone here want to help kick down on any lists besides what has already been mentioned?