|
YellowIH 07-02-2002, 06:11 AM Going to do some customizing to my spring packs the night before a ride to clear the 37's better and just want to try and have what I need.....what size diameter is the spring pin center bolt??? Thanks! :D :flipoff2: :D ol John Henry 07-02-2002, 06:23 AM forget the stock size and drill out to use 3/8:D :D YellowIH 07-02-2002, 06:28 AM Originally posted by cornfedred forget the stock size and drill out to use 3/8:D :D Thanks but I have never had luck drilling the springs and I don't have the time.....plus I usually use Grade 8 stuff....never had one of them snap YET So what's the stock size? :D :usa: RustoleumWhite 07-02-2002, 06:42 AM STOCK is 5/16"..... but drilling them is a sinch. Get a good, sharp bit, use a little oil, and go slow. Usually 1/2 the springs are already almost 3/8", so all your doing is clean up the hole. Like Cornfed said, take the 10 min. and use 3/8":rolleyes: piece of mind. tsm1mt 07-02-2002, 08:25 AM As the others said.. Stock is 5/16" I've broken more than a few, so I run 3/8" now. :D | |