|
: D60 Ujoints Compared 733X Vs SPL MT 07-02-2002, 02:14 PM I took the liberty of taking a pic of the SPL55-4x Vs. the 5-332x axle u joints. The forged SPL55 are not only cheaper but take a look at the cross shaft. There not CTM's but at $35 a pop it is a hell of a deal. http://4wdfactory.homestead.com/files/U_jointsD60xx.jpg MT http://www.4wdfactory.com onetonwillysands10 07-02-2002, 07:04 PM Originally posted by MT I took the liberty of taking a pic of the 733x Vs. the SPL55-4 axle u joints. The 733 are not only cheaper but take a look at the cross shaft. There not CTM's but at $35 a pop it is a hell of a deal. http://4wdfactory.homestead.com/files/U_jointsD60xx.jpg MT http://www.4wdfactory.com the 5-733x joints I saw looked exactly like the spl-55 4x.They were both greasable and indentical..As a matter of fact one of the 5-733x came in a box that a had a sticker on the end of the box which said 5-733x;but, you could clearly see SPL-55-4x on the box under the tape..The other one simply had 5-733x..I looked them up in the spicer u-joint catalog and the 5-733x is listed as a spl-55 joint indicating the same joint according to the catalog.Price was the same $27.55 for a 5-733x or a spl-55-4x. I have noticed they are considerably different in appearence and price from a 5-332x joint which is what the top joint looks like in your picture and the bottom looks like a spl or 5-733x joint.Just my two cents.:D mj 07-02-2002, 09:08 PM agree with onetonwillys, that is a 332 on top. bigdude 07-03-2002, 05:17 AM Originally posted by mj agree with onetonwillys, that is a 332 on top. Me too. That's just like my 332 on top. MT 07-03-2002, 05:48 AM My bad a used the vendor part numbers not the Spicer ones. I edited the original post Sorry for the confusion doctor_G 07-03-2002, 07:19 AM Isn't the 5-332 more expensive because it is a dedicated wheel joint? And the SPL55-4X can be used as a wheel joint or drivetrain joint? | |