|
Never Monday 01-26-2008, 02:23 PM Is there anyone around who knows this FI system inside out? I mean to the level of having the pin outs from the computer memorized. I'm trying to make a Renix injected 4.0 work in a carb'd chassis. JeepFreak21 01-26-2008, 08:54 PM 5-90 on NAXJA is the man I would talk to. Good luck, Billy Never Monday 01-27-2008, 03:25 AM Thanks, Apperantly no one has ever done this before.... 87manche 01-28-2008, 11:32 AM it shouldn't be rocket science, the renix harness is seperate from the chassis harness, you just need to feed it 12V from the ignition, and take a wire to a fuel pump relay, all the sensor and injector harness stuff you should be able to pull intact from the donor and not mess with it. goto the billavista tech repository, he has the renix FI manual in PDF format there, it has the wiring diagrams and pinouts. Never Monday 01-29-2008, 04:31 PM it shouldn't be rocket science, the renix harness is seperate from the chassis harness, you just need to feed it 12V from the ignition, and take a wire to a fuel pump relay, all the sensor and injector harness stuff you should be able to pull intact from the donor and not mess with it. goto the billavista tech repository, he has the renix FI manual in PDF format there, it has the wiring diagrams and pinouts. thanks | |