I made the rounds at the junkyards today and I thought I'd post the stuff I saw that can't afford or don't need right now. These are all at open yards so if you need something get down there quickly before they are stripped.

G&S truck and Van on Broadway and 27th ave.

2 80s Ramchargers with Dana 44s up front with no Vaccuum disconnect crap. They are already 5 lug and complete from hub to hub.

1 late 70s Wagoneer with front pass side 44 complete minus steering.

1 complete 1/2 ten bolt <IMG SRC="smilies/rolleyes.gif" border="0"> already pulled

1 reverse rotation Dana 44 housing in 79 Bronco

Firebird with a TBI 305 that as of right now hasn't been molested.

Arizona Auto Parts 27th and Buckeye next to Ecology

1 Reverse rotation 44 from 79 Bronco missing bearing hubs and rotors

1 1/2 ton front 10 bolt already pulled


Ecology Auto Parts 27th ave and Buckeye

4 Driver's side diffed Wagoneer 44s complete hub to hub. 3 non vaccuum disconnect 1 vaccuum disconnect. They all have HD AMC 20 rearends and 6-7 leaf front packs you could snag too. These are great for swapping into Tacomas or 87-present Jeeps

3 Chevy Dana 44s 2 partially stripped 1 complete

1 Ford Reverse rotation 44 3.50s minus steering and some other crap

1 77 Scout 2 that hasn't been touched yet it has 44s front and rear with 3.54s. The power steering box will probably disappear Saturday but you can try to beat me to it.

Travis

A big thank you to you <IMG SRC="smilies/biggrin.gif" border="0"> saved me some work. I might go check out that scout...

Originally posted by YDB:
<STRONG>A big thank you to you <IMG SRC="smilies/biggrin.gif" border="0"> saved me some work. I might go check out that scout...</STRONG>

If it's a manual, I'll buy the bell and flywheel from you. Let me know.

Joe

Joe I've told you 3 times now I have the parts you need to do your swap <IMG SRC="smilies/rolleyes.gif" border="0">. I have at least a bellhousing, flywheel, and used clutch with your name on them. Shoot me an email or a PM and we can figure what parts out of your junk pile you can trade me for them <IMG SRC="smilies/biggrin.gif" border="0">. The ecology Scout's an auto anyway.

There was also an Eaton rear end at Ecology that I forgot about. It has an open diff though so I don't know if it's anygood to anyone but it sure is huge <IMG SRC="smilies/eek.gif" border="0"> . Hope I helped someone out, I always hate to see good parts get melted down or destroyed.
Travis

This is a bit off topic, but I have been to those SAME junkyards... By any chance, in your looking, have you seen any junkyards that have a Kia Sportage in them? I really need a part from the steering column and the dealer wants like 300 bucks for it. Please let me know if anyone in AZ knows of a junk yard that might have Kia Sportages in it, I can't find them anywhere.

Originally posted by Nukeiridium:
[QB]Kia Sportages[QB]

What? Are you doing a solid axle swap?

Newbie <IMG SRC="smilies/thefinger.gif" border="0"> Welcome <IMG SRC="smilies/thefinger.gif" border="0">

Joe

Originally posted by Overkiller:
<STRONG>Joe I've told you 3 times now I have the parts you need to do your swap <IMG SRC="smilies/rolleyes.gif" border="0">. I have at least a bellhousing, flywheel, and used clutch with your name on them. Shoot me an email or a PM and we can figure what parts out of your junk pile you can trade me for them <IMG SRC="smilies/biggrin.gif" border="0">. The ecology Scout's an auto anyway.</STRONG>

OK head is now removed from my arse. PM headed your way. <IMG SRC="smilies/confused.gif" border="0">

Joe