|
fj40tom 07-03-2002, 09:41 AM My truck is on jack stands and the madness has started. I am going to SO my 40 with fj60 axles. I have searched the archives, but I still wouldn't mine digging up a pic of the front short side spring perch. I don't want to outboard the springs. Thanks for the help. tp Lone Star Land Cruisers :smokin: :smokin: :smokin: texican 07-03-2002, 10:14 AM Here's one Eskimo 07-03-2002, 10:23 AM i think he was referring to where the spring meets the axle..:p texican 07-03-2002, 10:27 AM DUH!!! Oh well, he mentioned when he was up here earlier in the week wanting a picture of my front spring hangar....here it is anyway. BTW guys he is putting 60 axles under a 40 I don't have an F'n clue how he's gonna do the short side perch and keep the spring perchs even with the frame. Butch fj40tom 07-03-2002, 11:09 AM Thanks Texican :flipoff2: :flipoff2: :flipoff2: I needed that too......... I still need a pic of a custom perch next to the pumpkin. Cheers, tp wngrog 07-03-2002, 11:10 AM BJ on Roids said he was going to post pictures of how he did this on a previous post..... Wassup Dude? I looked up the old post and there are no pictures. JasonH 07-03-2002, 11:18 AM Tom, Dog House is set up this way. There's some pics of it here. (http://www.pirate4x4.com/forum/showthread.php?s=&threadid=12364&highlight=spring+over) fj40tom 07-03-2002, 11:26 AM Thanks Harsch! Any other pics are geatly appreciated. tp:smokin: BJ On Roids 07-03-2002, 05:45 PM okay can someone shrink the pics down for me, im running the 60 axles and i sent jasonM the pics, but they were like 1 meg each and i have no way to shrink them down :( but if you want copies he can send them out, i also sent him the doghouse ones, which is similar to what i did, although ive never seen the finished product, so it was sorta made up!! but if someone could shrink them down i could put them up i have an idea, as its, been asked afew times, ill try and get the pics up by this arvo!! :rolleyes: FOR REAL wngrog 07-03-2002, 06:07 PM send them Beeatch.. wngrog@aol.com crawlin cruiser 07-03-2002, 07:38 PM Im running this set-up aswell. Evrything was great until I decided to remove my front 3rd and swap in a locker. I guess I welded my studs on AFTER the 3rd was in cus when I tried to take it out there wasnt enough clearence to pull the 3rd. So im trying to come up with a new solution cus im only runnin 3 bolts in the front short side:eek: morgan 07-03-2002, 08:09 PM Spring-over, shackle reversal, electric front locker, tcase rebuild, and general Mudrak Improvement. (http://www.birfield.com/~morgan/tech/soa_etc) Morgan BJ On Roids 07-03-2002, 08:33 PM sent the pics to adam now sending to grog!!! :D BJ On Roids 07-03-2002, 08:41 PM http://www.birfield.com/~morgan/tech/soa_etc/img_0020-md.jpg what is this? :eek: is that rear steering, or selectable or neither? or WHAT? morgan 07-03-2002, 08:46 PM Originally posted by BJ On Roids [IMG]what is this? :eek: is that rear steering, or selectable or neither? or WHAT? Ha! I thought that was funny. That's Dave "beanz2" and Rob lying under Dave's 40, looking at something or other. Dave's got a home-brew full-floater conversion, custom axle shafts and aisin locking hubs on the rear. Toyota cable lockers too, nice 40. Morgan RUFF 07-03-2002, 08:47 PM Isnt that a full floater with custom axles and a set of freewheeling hubs? BJ On Roids 07-03-2002, 08:55 PM why would you want selectable axles on the rear? :confused: unless it was just for the full float conversion? looks as though he might not have too good an eye with his saw either, he's left a big dag hanging down to rip his tread off that looks due for some grinder loving RUFF 07-03-2002, 09:42 PM Why selectable rear? I have thought of seting this up on the rear of my pickup so if a third gets blown it is easy to disconect and just keep driving on the front and its also good for flat towing. BJ On Roids 07-03-2002, 11:25 PM how often do you brake a rear third? yeah thought so! and as for flat towing, just get it trailered!! (i was gunna say get a cruiser and dont need to get towed) but i remembered the little effort on sunday :flipoff2: RUFF 07-03-2002, 11:36 PM Originally posted by BJ On Roids how often do you brake a rear third? yeah thought so! Says he who has really wheeled all of 5 times :flipoff2: :flipoff2: Ive broken enough to wish i had this :D SpaceGhost 07-04-2002, 05:23 AM If ya gotta ask, you don't need these! BJ On Roids 07-04-2002, 05:58 PM Originally posted by RUFF Says he who has really wheeled all of 5 times :flipoff2: :flipoff2: Ive broken enough to wish i had this :D 5 :confused: that's pushing, it, well two times on rocks, plus 3 lawn jobs, sorta equals five, but on this one time i saw a rocky driveway........ :flipoff2: :D out of curiosity have you broke a rear third since your wrap bar installation?, how/why did they break? couldnt be all that horsepower could it? ;) all 4 cylinders:skull: maybe it was those MASSIVE bald 34s :emb: :flipoff2: but seriosuly why have they broken? when mine broke, it was cause i was being stupid and had no wrap bar in | |