o.k. i have a 1971 d44 with drum brakes and i am wondering if everything from the knuckles out(including the knuckles)from a 1982-1996 twin i beam front axle will bolt onto the d44 solid axle. do i need different ball joints? steering? if anyone has any info please help. thanks

Hmm I dont know if that will work. The swap that I did used chevrolet outer stub shaft, spindles, and all that good stuff. Bolted right up

Knuckles wont fit because the balljoints are spaced further apart on the TTB setup.

All you can use from that set up would be the rotors and lockouts. Do a search over at classicbronco.com lots of info over there