I have a 93 toyota 4x4 that me and a couple buddys of mine are going to do a Solid axle swap to very soon. I am having problems with my driveline though.I have a 2 piece wit ha CV and it is I think 65" long give or take an inch..I want to take my front driveline off because of the better angle and get it extended and use it for the rear. I need to know if there is a yota that has a 65" driveline or one that will work for what i need. I would use the one i have know but the angle would be to great and it is my daily driver so i need one that wont shake my truck to death..

Just take the rear driveline in and have the rear section of it w/ the CV on it retubed to the right length for the whole one-piece driveline. It will have enough angle. Its a pretty common swap since it costs less to do that then to replace the center carrier bearing.

Call up Jesse at www.highangledriveline.com/

http://www.pirate4x4.com/highangle.html

and he'll hook you up. :D

(although any driveline shop should be able to do it for you)

TOP :nuke: :nuke: :nuke: :nuke: :nuke: :nuke:

please help, need to know where i can get a cheap one piece 65" driveline for my yota....TTT:flipoff2: :flipoff2: :flipoff2: :flipoff2:

TTT :flipoff2: :flipoff2: :flipoff2: :flipoff2:

Don't you think you might get better results on the Toy board? Try here (http://www.pirate4x4.com/forum/forumdisplay.php?s=&forumid=12)