Thought we would put out an affordable alternative for mounting your links to your frames. These are built from 1/4" A36 and are formed 3 different ways to make this unit the most rigid available. Not to mention one of a kind in design! We cut out a plug weld slot down the center to increase the welding surface by 35%! The inside dimension of these are 2 5/8" between the mount holes so that you can use these w/ any heim or johnny style joint. The mount holes are 9/16" diameter and can easily be reamed for larger heims. You guys demand the best so here is the best part we sell these for $8.95ea plus shipping and trust us alot of these can be crammed in a USPS flat rate box! Compare similiar parts @ $20 ea Realize we are not trying to retire from every sale!

Do you have a pic of these with a Johnny joint in them? Im asking because I want to see if there is enough room to plate the front of the mount and cover the backside of the joint from impact. It looks like form those pics the joint will hang out a little?

Thanks

RG

I use Currie joints on my current rig and they are 2" OD, my bracket is 7/8" from center of hole to edge of bracket. So in that case the joint is hanging down slightly. With that stated I designed this bracket to let the rig slide on the link and joint and not get hung up on the bracket. How many times have we all seen a rig slide over an obstacle on a link? This was the reason for my design. That and the fact w/ newer suspensions flex is important and I wanted these to be able to accomodate a large variance. Thanks Shawn


Do you have a pic of these with a Johnny joint in them? Im asking because I want to see if there is enough room to plate the front of the mount and cover the backside of the joint from impact. It looks like form those pics the joint will hang out a little?

Thanks

RG

selling alot of these guys it must be the HOTT! ticket

bump

Tried calling your number to place an order. Just got a voice mail. Left my number but no return call yet. Do you still have any of these available? I need 4 of them. 607-742-7777

Bump to the top, always in stock......

called today to place an order, left a message, just waiting for a return call.

Charlie Horn
Chu

when are you going to have all this stuff on your website... i keep finding new stuff you guys are commin out with on here but it would be nice to see it all in one place... just my opinion. you guys do great work though i just got my diff cover and its awsome thanks

what is the length and width of the slotted section?

2 9/16" ID by approx 4" long Thanks Shawn

what is the length and width of the slotted section?

Thanks for the pimp, our web guy CD is under the gun on our new website which will be automated. I hope to have a new site up in the next month or so. Thanks Shawn


when are you going to have all this stuff on your website... i keep finding new stuff you guys are commin out with on here but it would be nice to see it all in one place... just my opinion. you guys do great work though i just got my diff cover and its awsome thanks

Ill be giving you a ring whenever i get some free time.

That or PM me your # and i can call on my dime:smokin:

Ill be giving you a ring whenever i get some free time.

call me back...and within a minute of the post i get a call. Nice.

Sometimes I get lucky! We try and sometimes we do better than others. And no I will not tell you how many hours a year we work for you our customer. Why you may ask? Because its our job and it really doesn't matter. Kind of like me asking you how many hours it took you to be able to save up the money for those cool parts. Shawn


call me back...and within a minute of the post i get a call. Nice.

Got the second package in yesterday...thanks a lot man, you know ill be buying up more again soon.

Great quality stuff here, I recommend these to anyone.

Tried again to reach your number but only getting an answering machine. No one returns my call. 3rd try. No way to order them if you don't answer.

PM me your #, I was out for a couple of days. I can and will get you taken care of. Thanks Shawn

Tried again to reach your number but only getting an answering machine. No one returns my call. 3rd try. No way to order them if you don't answer.

i need 5 how much shiped to 91316???

Thanks,
-Ron

You have a PM, Thanks Shawn

i need 5 how much shiped to 91316???

Thanks,
-Ron

Ordered. Thanks.

Sweet, Thanks Shawn

Selling these fast......................

Our new motto.........






Buy it once from us the first time, no sense in buying them from someone else just to end up buying ours the second time around. Quality counts.

Received yesterday, thanks. Look and fit great.

Yes these have been real popular and I'm glad you like em. Although I guess the price speaks for itself, why pay double for the simliar parts? Thanks Shawn

Got a call from Shawn on these and shipped right out. They are just the ticket. Thanks for handling it personally.

We appreciate the opportunity. Thanks Shawn


Got a call from Shawn on these and shipped right out. They are just the ticket. Thanks for handling it personally.

I would like 4ea of the these frame 4 link brackets.:grinpimp: Zip. 72015

You have a PM, Thanks Shawn

I would like 4ea of the these frame 4 link brackets.:grinpimp: Zip. 72015

bump

ttt

Will these work with RE super flex joints?

I assume since most johnny joints are the same. However these are built for the joints that are 2 5/8" wide by 2.5" OD I also believe the will accomodate a 3" tube diameter also. Thanks Shawn

Whens the updated website going to be ready? I'd like to see everything you guys offer in one convenient location. Keep up the good work.

Its definitely on the down hill run..... I hope within a couple of weeks all the bugs will be out of it! :D

Whens the updated website going to be ready? I'd like to see everything you guys offer in one convenient location. Keep up the good work.

This price is unbelievable! Just check around we had a new vendor buy us completely out. So we are restocking for the same price as before and deciding we will keep it here where it is at!


Its definitely on the down hill run..... I hope within a couple of weeks all the bugs will be out of it! :D

e-mail sent ?


Mike Green

Pm and e-mails sent ?????
message left
Mike Green

Sorry did not see this, anyhow you have a PM. To answer the question though I would not run a 1/2" bolt in a 9/16" hole as that is just asking for problems. Thanks Shawn

bump

Shawn call me

Mike Green

called several times and left messages and also some PM's. Hopefully you have the info you need. Advise, Thanks Shawn


Shawn call me

Mike Green

called several times and left messages and also some PM's. Hopefully you have the info you need. Advise, Thanks Shawn

LOL

I know the feeling,no I still need to talk to you. I am waiting for a phone call this morning.

Mike Green

you should have those brackets very soon.

ttt

bump

selling these as fast as we get em.....................

bump

Thanks for the orders guys. Shawn

Ttt

Yes we are still building these! For a fair price I might add.................................

Thanks for the orders!

ttt

here we go again!

ttt

in stock and ready to ship!

ttt

more in stock and ready to go!

2 shipped to 46815?

ttt

ttt

4ea Brackets shipped to 72015:D

thanks for the order!

2 shipped to 28655

Also,

Do you have a solution for an upper driver link at the from for a 3 link, One I could weld to the inner frame rail for the upper link.

I don't see any of these on your site?

Just saw this, if you still need something please PM me. Thanks Shawn

Nope, I already got it else where.

ttt

a couple more sizes available!

What is the distance from the top mounting surface to the center of the bolt hole?

Thanks
Joe

Two different sizes available now, if your interested still let me know and I will send you a PM w/ the info. Thanks Shawn

What is the distance from the top mounting surface to the center of the bolt hole?

Thanks
Joe

Still interested thanks.

ttt

What are the new sizes? I tried to look at your website but it was down?
thanks

Who is dan? This is GLO, and this is standard pricing not some once off deal.

You have a PM, sorry new site is to be up shortly. Thanks Shawn

What are the new sizes? I tried to look at your website but it was down?
thanks

ttt

4 lowers to 74344. Also do you have the upper mounts?? if so a price quote on the uppers as well.

You have a PM, Thanks Shawn

ttt

quote for two shipped to 78729?

You have a PM, Thanks Shawn

quote for two shipped to 78729?

Do you have these in a 2" width also?

Not currently, what joints are you planning on using that you need them 2" wide. Let me know. Thanks Shawn

Not currently, what joints are you planning on using that you need them 2" wide. Let me know. Thanks Shawn

I've got Rubicon express long arm rear uppers that I'm looking for brackets to triangulate the rear. I may just sell them and make my own arms using proper joints

Thank you, let me know if we need to cook these up in a 2" wide version guys? Thanks Shawn

ttt

i need two shipped to 30179!

used 2 of these a couple of years ago when i did my rear 4-link and they are really nice and beefy!

ttt

Price on 5 shipped to 01128.

Thanks

You have a PM, Thanks Shawn

Need 4 upper mounts shipped to 76044.:smokin: Thanks Johnie

4 shipped to 37090
thanks,

ttt

bump

Bump for a great product. I purchased 4 of these for my link set up and they work great!

Thank you!

ttt

These have been real popular this week, can't beat the price!

ttt

Price on quantity of 4 shipped to 92504 please.

you have a PM, Thanks Shawn

Price on quantity of 4 shipped to 92504 please.

Does anybody out there have any pics of these installed in their rig? Just trying to get a visual of the size. Thanks

4 shipped to 49336. do you have uppers

Not sure what you mean by uppers as these are for the frame end which is usually considered the uppers end of a set of links. These are $8.95 ea plus $11.00 via USPS flat rate box so 4 of them would cost $46.80 delivered. Thanks Shawn


4 shipped to 49336. do you have uppers

parts are available on our site, Thanks Shawn

Not new but still very popular! On the shelf ready to ship! Check them out on our website http://www.greatlakeoffroad.com/GLO-Link-Bracket-Frame-Mount.html

is there a pirate discount or did the price go up? please pm thanks
steve

Price on the website is the going rate for these. Thanks Shawn

is there a pirate discount or did the price go up? please pm thanks
steve

ttt

ttt