|
: Automatic Swaybars or In Cab Weasel 07-07-2002, 09:02 PM I was reading where a Baja Trophy truck has an automatic sway bars that they can release by pulling a lever inside to release the swaybars in the straight rough, then pull it again and rehook them up for the corners. Any idea how I can go about making one of these or somewhere I can look? moveaside 07-07-2002, 09:52 PM Take off the swaybar and leave it off. Weasel 07-07-2002, 09:56 PM Originally posted by MOVEASIDE Take off the swaybar and leave it off. :rolleyes: Did you even read my post? Thanks for the dumbass answer. I already have them off and it sucks. Brad 07-08-2002, 05:43 AM Originally posted by MOVEASIDE Take off the swaybar and leave it off. HIPO-crit:flipoff2: Sundowner 07-08-2002, 07:02 AM I had seen these before in the back of one of the rags. it was a pair of collars that go on the sway bar (after you cut the par)with a cable activated shear pin that slides between the two collars. I haven't seen the ad in a while, I don't know what became of the product. Weasel 07-08-2002, 07:22 AM I was thinking of something simial to that but basiclt taking the stock bar cuttting it in half and having both ends splined. The have a sliding collar that is cable activated. Sort of like the alxe dissconects on the Jeep D30. JHarsany 07-08-2002, 09:56 AM Another Idea... Fab a sway bar similar to a currie antirock, but have it splined to fit a 30 spline hublock at one end. You could get a pulse activated hublock off a super duty ford and mount it to one of the sway bar arms. Then run vacuum to it and you can disco at the push of a button. | |