I already have a 2" spacer lift with a aal and want to step it up so i can fit those 33" grabber mt's. Who makes the best 3' spacer lift? Can i just add another leaf in the rear? I dont want to change my shocks as i realy dont care about travel ;> . I may try a diff drop bracket, because i have already burned up one set of cv boots. Let me know what you think. thanks guys.
Oh yeah i also searched about body lifts and heard they may affect handling and dont really want to go that route.

:beer:

ok, first off all spacer lifts suck! :shaking::shaking::barf:Get some coil-overs under that IFS front. Then go with some 3in lift all-pros in the rear or any other brand of springs. or you can just add a shackle lift to your add-a-leaf...you will need an 8 or 8.5 inch travel shock in the rear as well....Stop pussy footing around and spend some money on quality lift parts...I have the Fabtech 2.5in nitrogen coils up front for the past 3 years and have never gone through a par of cv boots..( I also have the 1 in diff drop spacer from all pro that helps with the cv angle)….i run the 285x75x16 (33x11.5) x-terrains......a little trimmimg and sledging did the job to make them fit...with no rubbing......so hope this helps!!!

ps: nice screen name......:flipoff2::flipoff2::flipoff2:

Is this for a Subaru or a VW?

Really man, you have to be a little more specific...

If this is for a 2wd Mall cruiser you should simply find another board.

ya the whole i dont care about flex thing makes me wonder if pot holes are his favorite type of obstacle.