|
XJ_209 02-21-2008, 02:50 PM Wut ring and pinion comes stock in a 93' xj and wut comes stock in an 88' yj dana 30 front and yj dana 35 rear if anyone knows please let me know thanks! aaron92685 02-21-2008, 05:18 PM My 87 YJ HAD 3:55 txdave 02-21-2008, 05:22 PM Wut ring and pinion comes stock in a 93' xj and wut comes stock in an 88' yj dana 30 front and yj dana 35 rear if anyone knows please let me know thanks! look for the ratio on the tag on the axle diff.............it will tell you what youve got in it. XJ_209 02-21-2008, 05:28 PM well when i went to order one it asks if i got short pinion reverse pinion or just the regular pinion? dont no which i got hardhead 02-21-2008, 06:12 PM well when i went to order one it asks if i got short pinion reverse pinion or just the regular pinion? dont no which i got it maybe like mine a regular short reverse pinion as for the tag mine was mounted in the axle housing and had so much gear oil on it i couldnt read it jeffy 02-21-2008, 06:33 PM There is no set ratios for any XJ, YJ, etc... Depending on the options it has it could have 3.07's, 3.54's, 3.73's or if it's a 2.5L 4.10's. I believe 3.73's only started appearing around 1991 so if you have a earlier model, you'll more then likely have 3.07's or 3.54's unless it's a 2.5L which would have 3.73's and 4.10's even back then. On the diff there should be an ID tag. It will read something like xxxx 307 xxxx. The middle set of numbers are your ratios. crashnzuk 02-21-2008, 08:00 PM well when i went to order one it asks if i got short pinion reverse pinion or just the regular pinion? dont no which i got This should be in reference to high pinion vs low pinion. High pinion are refered to as reverse cut gears. Travis.. | |