PDA

View Full Version : Where to get a new thread adapter for my notcher?

knaffie
03-01-2008, 01:43 PM
This adapts 1/2" (shaft size) to 5/8" (holesaw size). Came with my notcher, which I got off Ebay a few years ago. Anybody know where I can get a replacement? A slug caught and busted it today.
DSW
03-01-2008, 02:17 PM
Is it 1/2" inside? It almost looks like the metric to 5/8" adapter for my grinder. Maybe you could retherad the metric center of the adapter. It my be posible to machine one from a 1/2" nut. Turn it down and thread for 5/8"
Jeepermat
03-01-2008, 02:20 PM
Fastenall
Jeepermat
03-01-2008, 02:21 PM
Also until you get one just tack weld that adaptor to the hole saw, I have done that many times
knaffie
03-01-2008, 02:25 PM
Fastenall

Any idea part number, description, etc.? I'm not coming up with anything searching on their website.
knaffie
03-01-2008, 02:26 PM
Also until you get one just tack weld that adaptor to the hole saw, I have done that many times

Never though of that. Good thought.
Hosejockey
03-01-2008, 04:31 PM
ive bought them from midstate bolt and screw also most tool stores will have them
jstarnes
03-01-2008, 05:49 PM
when you get the new one use a washer between the hole saw and adapter


:flipoff2:
Jeepermat
03-01-2008, 05:54 PM
Any idea part number, description, etc.? I'm not coming up with anything searching on their website.


No, but the one that came with my JD2 notcher was in fastenall packaging, if you have one near you just walk in with it, they will know exactly what you need.
PARANOID56
03-01-2008, 08:06 PM
I got one at home depot the other day. it was with another item in th tool /hole saw area.
PaulT
03-01-2008, 08:26 PM
Lenox and pretty much any other hole saw manufacturer make them. I dont know the part number but for work we get them from ACME construction supply or Fergeson.
Arya Ebrahimi
03-01-2008, 11:07 PM
Last time I bought one I had to buy a new arbor with it(came in the package). Sucks 'cause I already have 4 arbors, but that was the only way I could find it and I was in a hurry.
suzukiwarrior
03-02-2008, 03:31 AM
is this what u need http://www.fastenal.com/web/products/detail.ex?sku=0207221
knaffie
03-02-2008, 05:59 AM
is this what u need http://www.fastenal.com/web/products/detail.ex?sku=0207221

Thank you very much!
paulkeith
03-03-2008, 11:58 AM
when you get the new one use a washer between the hole saw and adapter


:flipoff2:

yep, x2. the hole saw threads on too far and gets above the threads. maybe i could buy a nice notcher some day.
knaffie
03-03-2008, 12:03 PM
Fastenal had two in stock. Thanks again guys!