[COLOR=orange]Tie-rod ends and HD ends[/COLOR] [Archive]


Pirate4x4.Com > General Tech > General 4x4 Discussion > [COLOR=orange]Tie-rod ends and HD ends[/COLOR] PDA : [COLOR=orange]Tie-rod ends and HD ends[/COLOR] Harvester of Sorrow 07-09-2002, 02:21 PM Hey... I have a Dana 44 front on my Scout II. Standard steer, spring under, and my tie-rod ends seem to be bent:eek::eek:. they are bent back and at an angle. I would like to know what HD GM type of rod end has the correct taper to use on my rig. Is it the "SMALL" taper? I am going to mill a solid 1-1/4 stainless shaft with taps. Do the still need to be left and right hand threads or can't I go with two "standard" thread ends since I am building my own? Old Scout 07-09-2002, 02:49 PM ES150l & ES150R fit scout junk. There 3/4-16. 4Bangler 07-09-2002, 03:26 PM If you use standard thread at both ends, you won't be able to adjust toe without taking one end off, big PITA, accidentally did it on a buddies Heim jointed tie rod, oops. Old Scout 07-09-2002, 03:36 PM Originally posted by 4Bangler If you use standard thread at both ends, you won't be able to adjust toe without taking one end off, big PITA, accidentally did it on a buddies Heim jointed tie rod, oops. Master Of The Obvious! :flipoff2: JU down today?