Whats everyone running for jets in their 2100's?
I'm running WAY to rich. If i remember right its got 54's in it. I'm @ 7000' usueally(sp?) wheeling between 7000 and 14000. Im thinking drop down to about a 50?

Dropping 4 jet sizes seems like an awful lot to me. I've always gone down one or two at the most and tried it. I would suggest dropping to 52 and give it a try for a little bit. Do a plug reading and go from there.

I'm at 7000 ft. and running 46's in mine and going to 45 maybe 44 soon as I can get them.

Check what size of 2100 you are running. There are several different venturi sizes available. This will make a difference with what jets to use. Under the accelerator pump linkage on the float bowl, there should be a number cast into the side such as "121". This is the venturi size in inches. 121 = 1.21". This is the big carb, and may need leaner jets to work. It may be too big to work on a 6cyl.

BigRed84cj8 posted a bunch of info about 2100s just last week,
his post should not be hard to find.

Originally posted by CJ7_Bob
I'm at 7000 ft. and running 46's in mine and going to 45 maybe 44 soon as I can get them.

Skinners carb service here in ABQ has em.:D