|
: SF 14 bolt, any body got some info? Weezer 07-10-2002, 01:05 PM Just looking for info on these things. I know they got the crapy c-clip but can some one tell me the stats. like Ring gear size, spline count, axle shaft size, do they have a 3rd pinion bearing like their big brother, how does clearence measure up to other axles. Any other general info would be great. P.S. I did the search and didnt have much luck. Thanks in advance for the info The Rockslut 07-10-2002, 01:13 PM 9.5" Ring gear NO 3rd pinion bearing Not positive on the spline count and diameter but i think they are like 31 spline and 1.45" Weezer 07-10-2002, 04:07 PM Thanks for the info Rockslut, can anybody confirm the specs on the shafts. Sound like these things are chevys weak version of the ford 9" ramv 07-10-2002, 06:21 PM 9.5" Ring gear, '82 and up models were 33 splined, 1.37" axle diameter. Essentially its GM's version of the Semi-float Dana 60. Good gear choice, ARB available. Clearance is better then a 60 I think, but not sure. Not really comparable to the 9" since it has regular pinion placement and non-removable 3rd member. Available in 6 lug and 8 lug, believe the 8 lug was the only available with oem disc brakes. Good solid axle, especially with disc brakes, you won't loose a wheel even with c-clips. Seems like a decent choice for GMs and big tire, light weight vehicles. MR4WD 07-10-2002, 06:46 PM Nah.. I had a lousy 3/4 2wd service truck once... 4.3 liter to boot... 8 lug and drums that would take miles to slow the truck down... ramv 07-10-2002, 06:51 PM Sorry worded that poorly. I don't believe the 6 lug was ever availble with factory disc brakes. (found on pre '99 2500 light duty and 1500 hd models) The '99 and up 2500, 1500 HD and '01 and up 2500HD had oem disc brakes and 8 lug wheels. (6.0L only models) Oxjockey 07-10-2002, 07:01 PM The '99 and up 2500, 1500 HD and '01 and up 2500HD had oem disc brakes and 8 lug wheels. The SF 14 bolts are still available? ramv 07-10-2002, 07:04 PM Uh huh, all 6.0L came with them I belive, although not 100% sure on Denalis, Escalades and C Series. Also the H2 has one with the oem E-Locker. RD40 is the ARB locker part # Detroit, Lock-Rite, Auburn and Eaton also have offerings, West Coats gear has 4.88s availble. Pinion Shaft Diameter: 1.876" Ring Gear Bolts: (12) LH Thread 12X150mm Pinion Splines: 30 Cover Bolts: 14 K10, K15 90-Present C10, C15 90-Present K20, K25 81-Present K30, K35 89-Present C20 81-Present C30, C35 83-Present | |