|
77chevy 03-11-2008, 08:18 PM :(just wanted to say hi this is my first post....i just got my first truck it is a 1975 chevy 3/4 350 4speed i locked the front hubs and moved the leaver around and the front made a poping sound im i doing something wrong or is it the truck? i think it is a 10 bolt front and a 14 rear any help would be appreciated trkklr77 03-11-2008, 09:28 PM so which post is your first post? bigyellowjimmy 03-11-2008, 09:59 PM Its his third first post I've read ..... anyway, now that you found the right forum.... "moved the leaver around" means what? Did you put it in 4 hi, 4 lo....?? 77chevy 03-11-2008, 10:17 PM i went thruogh all of them 4 lo 4hi and the back tire were just spining in the mud bigyellowjimmy 03-11-2008, 10:20 PM when the back tires are spinning is the front driveshaft spinning as well when the transfer case is in 4wd? Does it have a front driveshaft? 77chevy 03-11-2008, 10:32 PM i never looked i just ausmed that there is a front drivshaft 77chevy 03-12-2008, 02:58 PM the front driveshaft was there and spining Nor Cal Wheelin 03-13-2008, 11:42 PM Ok, if the back tires are spinning and the front drive shaft is spinning, but the front tires are not spinning. (( assuming the hubs are in fact locked in )) Something is broken. Front hubs, front ring and pinion, front axle shafts all come to mind. Find some one to pull it out, take it home and tear it apart. If you have doubts about this task, take it to a shop and have them do it. Paying some one thats qualified to do this, is better than having a broken pile of truck in your driveway... | |