JAKE
03-23-2008, 08:26 PM
1993 Chevy vortec v6 engine conversion.
This is 95% of what you will need for a engine conversion. I just pulled this out of my rock buggy.
The motor is from a 1993 Chevy s10 with only 33000, documented miles!
The motor is the vin code W motor. The difference is the W code used a balance shaft, roller cam shaft, different heads, and Central Port Injection. The motor stock produces 205hp and 195 ft lbs of torque.
The motor with the additional upgrades I have added produces approx 235hp.
Here is a list of what the conversion includes.
4.3 cpi v6
painless wiring harness
7747 gm computer
superchips 25hp chip
K&N cone style air filter
Taylor spiro-pro competition spark plug wires
K&N chrome breather
stand up gm distributor conversion
a/c pump was converted into an air compressor
ngk spark plugs
carter p5000 fuel pump with lifetime warranty
Carter spider fuel injection assembly ($380.00)
Radiator with hoses. The radiator will bolt into 84-95 Toyota trucks and 4 runners. It will also fit nicely into a jeep conversion.
In the last 2 years I have installed a new serpentine belt,
new cap and rotor, new starter, lifetime warranty, and a new o2 sensor.
This thing is complete with all the power steering lines, throttle cable, 700r4 kick down cable, fuel lines, nuts and bolts, ect.
Over $2600.00 invested.
I am asking 1600.00. Jake 775-379-8636
This is 95% of what you will need for a engine conversion. I just pulled this out of my rock buggy.
The motor is from a 1993 Chevy s10 with only 33000, documented miles!
The motor is the vin code W motor. The difference is the W code used a balance shaft, roller cam shaft, different heads, and Central Port Injection. The motor stock produces 205hp and 195 ft lbs of torque.
The motor with the additional upgrades I have added produces approx 235hp.
Here is a list of what the conversion includes.
4.3 cpi v6
painless wiring harness
7747 gm computer
superchips 25hp chip
K&N cone style air filter
Taylor spiro-pro competition spark plug wires
K&N chrome breather
stand up gm distributor conversion
a/c pump was converted into an air compressor
ngk spark plugs
carter p5000 fuel pump with lifetime warranty
Carter spider fuel injection assembly ($380.00)
Radiator with hoses. The radiator will bolt into 84-95 Toyota trucks and 4 runners. It will also fit nicely into a jeep conversion.
In the last 2 years I have installed a new serpentine belt,
new cap and rotor, new starter, lifetime warranty, and a new o2 sensor.
This thing is complete with all the power steering lines, throttle cable, 700r4 kick down cable, fuel lines, nuts and bolts, ect.
Over $2600.00 invested.
I am asking 1600.00. Jake 775-379-8636