Sorry for sounding so dramatic. One of the final steps in my latest project (1 tons, 38.5s, etc.) is bushings for the Waggy springs I swapped into the front of my YJ.

Problem is, I can't find any. This is for the large eye end. The ID of that spring eye is 2 inches. So, I need a bushing with a 2-inch OD. So far, no luck finding them.

Can anyone provide guidance or parts numbers? Gracias.
Dion

PS: Don't tell me to use the old ones; I already torched them out!

They are the same size as the large bushing from an aftermarket YJ spring in my 44044s. Did you already check the large bushing off your old YJ springs? I believe those will fit also.

Nope, the 44044s have an an eye ID of 1.5 inches on both ends. The Waggy springs I have have a YJ-sized eye on one end (1.5 inches??) and a 2-inch ID eye on the other end.
Dion

Foothilloffroad.com I just bought a whole set:D

NAPA P# 2746539 at the front of the spring, other end is P# 2741179.
this is for the rear spring-------
front springs use P# 2746539 at the front and 2741185 at the rear----fits waggies 74-90

Quit all your crying! I got em!

Thanks, all, for the info. Looks like my "parts runner" found them. LOL.
Dion

Originally posted by horse_with_no_name
NAPA P# 2746539 at the front of the spring, other end is P# 2741179.
this is for the rear spring-------
front springs use P# 2746539 at the front and 2741185 at the rear----fits waggies 74-90

are these rubber bushings ? if so how much are they ?

- jack

Originally posted by Blatant
Thanks, all, for the info. Looks like my "parts runner" found them. LOL.
Dion

Parts Runner........OUCH!

I just got you a roll of duct tape. The way I see it. You can just keep wrapping it around the sleeve till its thick enough. I


it'll match that roll cage:flipoff2: :flipoff2:

Originally posted by morpheus


are these rubber bushings ? if so how much are they ?

- jack

Yep they're rubber bushings. Just checked the price at www.napaonline.com and they're about $13-14 each.