|
toy 4 rox 07-12-2002, 08:51 PM going wheeling in the morning and just installed an ARB the silinoid is leaking from were the exhaust is the threded hole by the plastic star nut..how do i stop it it's just pissing alittle.can i take it appart?? there are 2 little screws under the black box.. do i need to oil the silinoid rokcrln 07-12-2002, 09:17 PM I just checked my old tec manual and it was no help. At this point if no one has any info I would try to take it apart and use teflon paste on all threads of any fittings. If you see a part that could use lube reach under your pillow and grab a little vasaline and try that. I don't think I would use any oil on it though. If this does not work you are not out anything. Also call Nick at S&H first thing in the morning him self and his crew are great at ARB's. Good luck. Keith 07-12-2002, 09:48 PM pull the selenoid apart and clean/lube it...... toy 4 rox 07-12-2002, 09:59 PM Originally posted by Keith pull the selenoid apart and clean/lube it...... are there any springs or things that i could screw up or is it simple in there rokcrln 07-12-2002, 10:06 PM No idea can't find a cut. just do it slow and in a very clean and well lit place in case they ba-ling!!!! Albino Man 07-12-2002, 10:50 PM I had that problem about 2 weeks ago and I just flipped my ARB switch on and off about 8 times and whatever was in there that caused the valve to piss, blew out. | |