For Sale/trade 1985 4runner Rock crawler
Specs:
ENGINE:
Stock 22re(Fuel injected), 5 Speed trans, with K&N fitler, Optima Red Top with BTF battery holder, also has hand throttle,flowmaster exhaust, runs excellent just installed new water pump, tensioner pulley, belt, just changed oil and filter, has new radiator and runs very cool, new E2000 external fuel pump, in line fuel filter, and braided fuel lines installed with fuel cell
AXLES:
Front:
-BTF bomb proof diff cover
-5.29s
-Detroit locker
-Bobby Long 30 Splines
-Aisin hubs w/ chromoly hub gear (for lifetime warrantee on longs)
-marlin crawler axle gusset
- 2” aluminum spacers
-Hi-steer with hydro assist (installed by southern off-road in august 2007)
-TG Cooler for hydro assist mounted behind grill (installed october 08)
-hubs and longs installed about 3 rides ago
Rear:
-IFS housing
-BTF bomb proof diff cover
-5.29s
-full spool installed by southern offroad in august 2007
-brand new rear disc brake setup using sky brackets,chevy rotors and calipers (installed october 08)
SUSPENSION:
-63” chevys in rear with buggy leaf setup
-brand new rear track bar with heims (installed october 08)
-not sure on front springs but they flex very well and balance with rears
-rancho adjustable shocks
-braided brake lines
-shock hoops
T-Case/Drive shafts
-4.7 marlin crawler gears
-Long travel drive shafts built by Birmingham spring
EXTERIOR:
-Bed bobbed approximately 10 inches
-4xinovation Sliders, front bumper, and tube doors
-Full Exo cage with x-brace professionally done by painless fabrication in opelika Alabama July 2007(same design tin benders did on the lime green 4runner only with different front bumper design and front fender bars)
-like new Warn 8000 lb winch only used probably three times to help other vehicles and re-spooled, properly every use
-warn roller fair lead
-truck had all body work done and was painted 2006 ecplise burnt orange in May 2007
INTERIOR:
-Sony CD player
-All weather 6x9s
-Hand Throttle
-4-point harnesses front and rear
-15 gallon RCI fuel cell(installed July 2007)
-Rhino lined floor
-Custom sheet metal panels to fill in area from bed bob
TIRES/WHEELS:
-36x13.50 Iroks id guess about 85-90% tread
-15" extreme alloys (look like classic IIs)
-Ive run these tires between 3-7 lbs since ive owned truck and have never blown a bead
MISC/SPARES:
- brand new 1" bore master cylinder from v6 4runner
-Comes with best top bikini top ( can be seen on truck in some of the pictures)
-4 Rock lights
-Truck comes with full doors in perfrect condition
-Tailgate
-Spare driver side fender (new fender installed when painted)
-Warn hubs (became spares when aisin hubs were installed)
-Some axles I think are the marlin chromoly inners and not sure what kind of outer birfs (were in truck when I got it and never broke them but became spares when longfields were installed)
-Spare front drive shaft and yoke for front or rear
-Full doors tailgate and fender are color the truck was when I got it I never got around to giving them to my painter


Ive had this truck for a little over a year now, It has been very well maintained. All of the parts are either new or like new. It has been very reliable, in over a year of wheeling i have only broken a rear driveshaft and that was probably my fault anyways,but that shouldn't be a problem ever again with the new track bar. I think Ive done just about everything you can to this truck and Im looking to get something else to mess around with.

Things i would like to trade for: 2 or 4 seat buggys, Jeeps with atleast a 350 and 39s or 42s,something on rockwells, or muscle cars
Trades i would consider: boats,cars, motorcycles of equal or greater value i could play with for a little while and then sell

The truck is located in birmingham alabama
Price is $11,000 with a tandem axle trailer (can be seen in some of the pictures) and 9500 for just truck and spares, i wont sell trailer by itself unless some one buys the truck first

pictures can be seen at:
http://s275.photobucket.com/albums/jj298/pardyam/?special_track=nav_tab_album

if they dont work let me know and i can email you the album

if you have any more questions about the truck the best way to get in touch with me is email me at pardyam@auburn.edu, or call Andrew @ 205-296-9240

Nice rig, Wish I had the cash.

bump for a sweet deal on a nice rig

its street legal?

Its street legal in alabama, and actually drives very well on the road I cruise to town and back sometimes on weekends. All it needs is a tag and insurance put on it which shouldn't be a problem because i have a clean title in hand. I dont really drive it on the street too much though because i have the trailer for it and im too cheap to pay for insurance on it every month. But kind of a funny story... one night really late i had a blow out on my tow rig on the way back from riding and didn't have a spare so i parked my tow rig on the side of the road and backed the 4runner off and drove it about 15 miles home and came back with a spare for the tow rig the next morning.

can the door be put back on .. it get pretty cold un winter where I live

yes the doors can be put back on with 4 bolts on each one and about 5 minutes of your time, if buyer would like i even throw em on for them before they take it away haha :D

Hope you don't mind I posted one for you. That's a very nice rig.


http://i275.photobucket.com/albums/jj298/pardyam/sideshot.jpg

Flexin81 i appreciate you postin the pic, feel free to post as many as you want, every little bit helps

I added a track bar to the rear last week as well as swapped the old rearend for an IFS rear, rig now has zero axle wrap. Now asking $10,000 for truck

Do you have any kind of top for it? I see it's been bobbed...

yes i have a best top bikini style soft top for it that is pretty much new, it covers the backseats,and if you dont fold the "wings" or arms, or whatever they are called, under it covers most of the back cargo area as well. You can see it on it in a couple of the pictures with the "wings" folded under, i usually just left it off because i store the truck in a standard garage and would just take it with me if i thought it was going to rain. Dont have anything as far as a hard top but if some one wanted to bob one i think you could also notch it in the front to fit around the x-brace and you could still use a hard top, but im not sure never really looked into. Thanks for your question

bump for more trade offers, but not what im lookin for yet.

Dual cased?

single case with the 4.7 marlin gears

Im located in farmington hills michigan, looks like im 700miles out, would you be willing to meet half way?

pm sent

price drop-9500
Andrew @ (205)-296-9240, leave message if I dont pick up

i have a 4 seater buggy with a mildly built 350 and 42s let me know if interested

send some pics to pardyam@auburn.edu

I have my tj for sale now if you think you might interested.

pm's sent- still for sale

sent you a pm

Nice rig and a great price..........

Bump for ya.

Thanks U Get IT and Napolian I returned your pm.

Sent another PM

Sweet rig.

Thanks Tiki, Napolian I returned your pm

I just picked up all the parts for doing the disc brake in the rear (the FJ 80 1" bore master cylinder,GM calipers and pads,GM rotors and disc brake brackets from Sky-manufacturing), a TG hydro assist steering cooler, and a new ignition control module as well. Im planning on doing the brakes,cooler, and putting the ignition control module on this weekend. If some one wants to pick this up for 9,000 Ill put the ignition control module and cooler on and return all the brake parts,or I can put on the brakes and Ill let it go for 9500. Let me know if your interested in getting this for 9K before I do the brakes,otherwise I wont be able to go lower than 9500 after I get the brakes done becuase ive already come off a grand and installed another $1500 (IFS rear,track bar with heims,brakes,steering cooler,and new ignition control module) in parts since ive had it for sale. Thanks, Andrew

also still open to trade offers

nice 4runner!

thanks for posting a pic and the free bump booger

ttt for the weekend, looks like ill be putting all the new parts on tonight. I wont be around my computer this weekend so if you have any questions call.

bump, got the cooler for the hydro installed and the new ignition control module, Ill be putting the rear disc and master cylinder on this weekend. Ill post pictures of the new parts after the weekend.

bump, got pictures of disc setup and track bar on my photobucket link. Sorry they're just camera phone pics but thats the best I could do

Ttt

http://i395.photobucket.com/albums/pp37/scumbagsbc/pont.jpg

A bump for a nice rig.

1greayskidd- by the picture it doesn't really look like something im looking for but ya never know with out specs, if its got a ram jet 502,powerglide,air ride suspension, and 6 piston brembos, lets talk. Just kidding, but send me a pm or email with the specs and Ill get back to you

Camomog- thanks for the bump man, looks like you got a pretty nice runner for sale yourself.

Thanks I like your rig as well. Thought about seeing if you were interested in a trade but figured you where looking for something different.

pm'd

pm's returned

Ttt

sold, well traded, but its gone