We designed this kit for the 203-205 doubler in mind but it will work on any manual trans combo with a 205 case.

Our kit comes with 2 Finned PTO covers, 1 Rear Bearing cover for the 205 front output shaft, and with front and rear Output bearing retainers.

These are all machined from 6061 aluminum and are machined in house on the latest Haas machining centers.

We wanted the pto covers to have a good look to them and have some function so this is why they are finned to help dissipate some heat and they have a 3/4 fill/drain port built in not welded.

I can separate the parts to a non kit form so if you need a price on a specific item please let me know.


Kit Price """""""$255.00""""""


AS SEEN ON EXTREME 4X4 !!!!!



http://i50.photobucket.com/albums/f302/56462/100.jpg?t=1207107538

http://i50.photobucket.com/albums/f302/56462/205parts200.jpg?t=1207107642

http://i50.photobucket.com/albums/f302/56462/300.jpg?t=1207107675

http://i50.photobucket.com/albums/f302/56462/400.jpg?t=1207107717

http://i50.photobucket.com/albums/f302/56462/450.jpg?t=1207107763

nobody needs a little bling

btt

Do you sell triple shifters for a 203/205 doubler?

still in the process of proto type

ttt

ttt

still have a couple sets left PM Me for special pricing.

ttt

I have some pto covers with a few blems on them if there is any interest?

What types of blems? Shoot me a price please.

What types of blems? Shoot me a price please.


The blems are just some cutter marks on the inside of the fins.

pm'ed

ttt

PM me a price for a package with and without blems to 66549

Got my stuff today, that junk is SAWEEET!!!! :smokin: Even the no brainer, non wheeling yahoos in my office thought they looked cool. :laughing: :D

THANKS AGAIN!!
John

Glad you like them John :smokin:

Thank You

ttt

PM Sent

PM me a price for the kit please.

Thanks
Doug

PM me a price for the kit please.

Thanks
Doug

pm's sent

PM me a price please

pm's sent

ttt

hey mac,

is this what you were talking about? kinda like a PTO cover with a bushing on it???

do you think you could make one for my 465 pto cover too?

Yeah Matt instead of fins it will be a solid block with a cross hole in it.

I am still drawing it up for you to look at.

Mac

i get what you are saying, dont forget a price...

so where does the bushing go????

i was invisioning something different i think.. a cover with a bushing mount on it or a cover with two tabs on it to recieve a bushing...

i guess im just not seeing it, it could be the wiskey...

Matt I have a better idea for this I will post it up tomorrow afternoon.:smokin:

Mac

sweeeet :smokin:

how about this Matt?

http://i50.photobucket.com/albums/f302/56462/PTOBUSHINGMOUNT4.jpg

http://i50.photobucket.com/albums/f302/56462/PTOBUSHINGMOUNT.jpg

http://i50.photobucket.com/albums/f302/56462/PTOBUSHINGMOUNT3.jpg

http://i50.photobucket.com/albums/f302/56462/PTOBUSHINGMOUNT2.jpg

Sorry for the big Pic's

Mac

that is awesome.

price?

65 bucks outta steel

85 for aluminum

mac

that is awesome,

can you work something up for the factory mount other side as well?

already working on it:flipoff2:

I knew you'd ask:homer:

Mac

Thanks bro,

dont forget shipping for both to 70124

you know you want to post some pictures!!!

Still have these :smokin:

do the finned covers fit the 465? If so a set of blems will work for me cost and shipping to 59105. Thanks

ttt

saw the pics with the mounts built in. i was wondering if that is just for support or will it hold for a crossmember? if so send price for both sides on sm465 w/ shipping to 93291. thanks. justin

Mounts are available if anyone is interested!!!

Anyone catch these on Extreme 4x4?

PTO cover mounts are now avalible.!!!!

Ttt

still have these avalible

Will those 465 mounts work on a ford 435 tranny? If so price to 98611 please.:smokin:

PM sent

MAC!!!

i finally got something for you!!!

sorry it took so damn long!

http://img.photobucket.com/albums/v350/rajincajintj/IMG_0852.jpg
http://img.photobucket.com/albums/v350/rajincajintj/IMG_0851.jpg
http://img.photobucket.com/albums/v350/rajincajintj/IMG_0850.jpg
http://img.photobucket.com/albums/v350/rajincajintj/IMG_0849.jpg
http://img.photobucket.com/albums/v350/rajincajintj/IMG_0847.jpg

the parts look and work fantastic!!!

thanks again for the hook up

Flawless np205 kit shipped to 95945 quote?

how much just for the aluminum pto covers for 203 / 205 with fill hole shipped to 99507

how much just for the aluminum pto covers for 203 / 205 with fill hole shipped to 99507

Pm Sent!!

Edit: Never mind... I just reread the first post; 3/4" fill hole in the pto covers. :homer:

Still very popular for the 203 205 guys!!!!!!


Mac

Mac I might be interested in some of those cover mounts. This is what I'm working with any sugestions?

http://www1.pirate4x4.com/forum/showthread.php?t=808960

Can you PM me with a price sent to 66442? Thanks

PM Sent

These are on the shelf.

Thanks

Mac

hey mac,

did you ever get the 465 PTO mount figured out??

i'll take one for the driver side if you got one

hey mac,

did you ever get the 465 PTO mount figured out??

i'll take one for the driver side if you got one



You can use the same style thats on your 205 pto cover.

I don't have a 465 laying around anymore.

But its the same 6 bolt pattern.

Mac

You can use the same style thats on your 205 pto cover.

I don't have a 465 laying around anymore.

But its the same 6 bolt pattern.

Mac

can you bust me out one? with a couple mounting tabs, shipped to 70124?

the original ones you made me were pimp and are holding up very well!!!

I can make another one up do you want 1 or 2 for each side?

I have 1 already blanked just have to stick the tube on.

This time use allen head bolts or 12 point bolts don't be grindin on it.:flipoff2:

How much for all the stuff for a 205 plus 2 extra pto covers (3 in all), shipped to 86406?

295.00 plus 120.00 for 2 more covers shipping is free.

I can make another one up do you want 1 or 2 for each side?

I have 1 already blanked just have to stick the tube on.

This time use allen head bolts or 12 point bolts don't be grindin on it.:flipoff2:

just one.

and ill grind on it as much as i want to!!! i cant have anything that nice on this heep!

just one.

and ill grind on it as much as i want to!!! i cant have anything that nice on this heep!

How long of tabs do you need I can set some up in the laser this week will the same style work from the last ones?

I don't remember what I charged you for the last mount shoot me a pm and we can figure it out I have this one built for you already. I also have about 100 bushings laying around I can throw one in the box :flipoff2:

How much for the dress-up kit for just a Chevy NP205 shipped to 92354?

Ok...so what would a set-up cost for a divorced NP205? ...3 bearing retainers...and a PTO cover?

Sent to 85203...

Thanks

I would like to buy a kit from ya, but was wondering if there was any chance of you selling a PTO cover for the Lomax205?
Thomas

I would like to buy a kit from ya, but was wondering if there was any chance of you selling a PTO cover for the Lomax205?
Thomas

we can make one to fit just never have been asked we just need to borrow a stock cover for a template.

Mac

I have an SM420 and divorced NP205. Please PM me the price on the covers for both of these. Thanks and Great Work!

figured id dig up an old thread.
I need some steel PTO cover mounts to support the weight of my 203 and 205 but didnt see em listed on your site.
Still making them?

getting ready to run a few sets of the support style covers .

Mac

got a pic of the bling installed?