baddassjeepguy- from back east and Mr.Lance (web daddy) will test the dana 44 moly wheel joints for us- Let the games begin huh! we want pic's -

Originally posted by onetoncv:
<STRONG>baddassjeepguy- from back east and Mr.Lance (web daddy) will test the dana 44 moly wheel joints for us- Let the games begin huh! we want pic's -</STRONG>

Need someone to test those new D60 joints? You may want to drop a line over at ColoradoK5.com as well, a bunch of poor guys over there still running the 1/2 ton stuff.

Bring it! <IMG SRC="smilies/bounce.gif" border="0"> <IMG SRC="smilies/bounce2.gif" border="0"> <IMG SRC="smilies/bounce.gif" border="0"> <IMG SRC="smilies/ghost.gif" border="0"> <IMG SRC="smilies/ghost.gif" border="0"> <IMG SRC="smilies/ghost.gif" border="0"> <IMG SRC="smilies/ghost.gif" border="0">

Originally posted by onetoncv:
<STRONG>Mr.Lance (web daddy) will test the dana 44 moly wheel joints -</STRONG>
What you picked Web daddy. *shaking head* We all know he don't wheel. He's a poser <IMG SRC="smilies/biggrin.gif" border="0">

<IMG SRC="smilies/thefinger.gif" border="0">

YeeHaw...let us know how it goes.

I, for one, could use something a bit stronger.

yeaahhhh, im ready to give it hell!

told a couple of my buddy's last night, they laughed and said i will break it... i sure hope there wrong....

ive been pricing 60's id love to see that bad boy stay together.... ill be buying stock in that shit...


pics to follow........ <IMG SRC="smilies/biggrin.gif" border="0">

Whenever you want to get serious about testing some joints for a 60 and a 70 let me know! I have a 60 frnt and a 70 front in the rear and all the power any joints can't stand <IMG SRC="smilies/biggrin.gif" border="0"> Hell I am willing to buy them. I'm getting real tired of these $50 joints breaking. <IMG SRC="smilies/mad.gif" border="0">

Hey Lance,
Could I borrow a set of those moloy U joints, someone borrowed my spare last weekend. <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/thefinger.gif" border="0">

if you want the 60 joint we can get you one or 2 - it might take 2 weeks or so- were not making lots of those yet- 169.00 if you want- the 44 joint should be around 95-105 range but lets see these two guys hammer them first and see how they hold-

Originally posted by onetoncv:
<STRONG>if you want the 60 joint we can get you one or 2 - it might take 2 weeks or so- were not making lots of those yet- 169.00 if you want- the 44 joint should be around 95-105 range but lets see these two guys hammer them first and see how they hold-</STRONG>
You ROCK! not only are you going out of your way to bring us inovative products but you are even not afraid to estimate cost (which seems to be a huge deal with most vendors) This is making a project 44 sound like a great upgrade from my yota stuff

sweet.. drop the hammer on them joints, give em hell <IMG SRC="smilies/scary.gif" border="0"> !!!

What setups do the testers have? Tires, power, rig weight, manual/auto?
Chad

Originally posted by 460 power:
<STRONG>What setups do the testers have? Tires, power, rig weight, manual/auto?
Chad</STRONG>

Rev cut 44 front end w/Detroit locker, 39.5" Boggers, SBC400, SM420

Originally posted by 460 power:
<STRONG>What setups do the testers have? Tires, power, rig weight, manual/auto?
Chad</STRONG>

39.5 swampers, hp nine/detroit/456 gear, 4 to 1 t case, 5 spd.. over 4000lbs under 5000lbs

Lance, Iv'e got video of those joints popping on your rig from last weekend. I can make you a copy if your'e interested.

guys i am sick and tired of hearing the same ol problems happining and nobody making anything better- i say if your in the buisiness then listen to the guys who use your stuff-or get out!

Jess that's what makes you the man..

<IMG SRC="smilies/grinpimp.gif" border="0">

Originally posted by Tom:
<STRONG>Lance, Iv'e got video of those joints popping on your rig from last weekend. I can make you a copy if your'e interested.</STRONG>

hell yeah!

steaming video on this site lets get it lance- we all want to see the breakage- just a note tensil stregth on our material as tested will be 240,000 - a hub should die at 55,000 we hope - lets test it - they should be here on tuesday - i hate delays but that's life- Jess

[ 09-07-2001: Message edited by: onetoncv ]

How are you guys retaining the cups? Full circle snap rings or tack weld? I've been tack welding.

Originally posted by onetoncv:
<STRONG>steaming video on this site lets get it lance- we all want to see the breakage- just a note tensil stregth on our material as tested will be 240,000 - a hub should die at 55,000 we hope - lets test it - they should be here on tuesday - i hate delays but that's life- Jess

[ 09-07-2001: Message edited by: onetoncv ]</STRONG>

Jesse, I run full time drive flanges, so the Warn axle should break before anything.
<IMG SRC="smilies/ghost.gif" border="0"> <IMG SRC="smilies/ghost.gif" border="0"> <IMG SRC="smilies/ghost.gif" border="0"> <IMG SRC="smilies/ghost.gif" border="0">

[ 09-07-2001: Message edited by: eXtremeLance ]

lance tell me when you can test huh- i might make a trip down - i have to see this ! Lets Get IT!

Originally posted by onetoncv:
<STRONG>lance tell me when you can test huh- i might make a trip down - i have to see this ! Lets Get IT!</STRONG>


Mark the trip..........I am there! Jess I am interested as you know about the new 44 joints, please put me on the list for a set of the new hardened types. I put on the new rear D-Shaft and it Fully Gets It!! Nice work!

<IMG SRC="smilies/biggrin.gif" border="0">

Jesse,
Id like to test a set of the hardened D44 joints. Ill pay for them. I have been tearing up a set of joints about every other trip, and they always take out the shafts with them. I have a set of Warn outers on the way, and a set of Moser high strength full circle clip inners in the garage waiting for their shot at glory. Hammer season starts next month, which is the reason for the new high strength axle components, it would be great to have the extra U joint strength.
Im not looking for any freebies, but I will be able to find out pretty quickly if they can handle the abuse.
Let me know.
Thanks

Originally posted by SquirrelMaster:
<STRONG>Originally posted by onetoncv:
if you want the 60 joint we can get you one or 2 - it might take 2 weeks or so- were not making lots of those yet- 169.00 if you want- the 44 joint should be around 95-105 range but lets see these two guys hammer them first and see how they hold-</STRONG>
You ROCK! not only are you going out of your way to bring us inovative products but you are even not afraid to estimate cost (which seems to be a huge deal with most vendors) This is making a project 44 sound like a great upgrade from my yota stuff

I second that!!

I will be there first hand with badass in viginia this ccoming weekend.

I will make sure he hammers it!! LOL Like he needs me to razz him to hammer it!

I will get the pics!

Originally posted by rockbound:
<STRONG>I will be there first hand with badass in viginia this ccoming weekend.

I will make sure he hammers it!! LOL Like he needs me to razz him to hammer it!

I will get the pics!</STRONG>

yeaahhh GE IT! <IMG SRC="smilies/biggrin.gif" border="0">

I have 20 bucks on the body not breaking. I have tried. The following will occur...

Caps blow out.

Warn outer blows taking the spindle, bearings, lock nuts, ect.. with it.

Detroit sprag blows.

Ring and pinion goes poof.

The body that jesse has built will hold up to anything.. its the other manufactures parts that cant hang with the Big Boy Ujoint... time for stronger stuff all around I say.

Give um your best shot guys....they will laugh at you!! <IMG SRC="smilies/tongue.gif" border="0"> <IMG SRC="smilies/laughing.gif" border="0"> <IMG SRC="smilies/laughing.gif" border="0"> <IMG SRC="smilies/laughing.gif" border="0">

Mike-

full round snap rings and moser or warn axles are a must - and h8 give me a call- i am ready to get this thing going! Wish We had mike testing still - i'm sure when mike's zuk is ready we will get it hooked up- Jess

anything ever come of the joints?

You brought this one back from the dead. You do ask a good question though. This is back before CTM's and such.

Haha...I was about to say, where the fawk was I when these came about??. Then I read the date. :flipoff2: So lets hear it anyway?

As far as I know, Jesse gave up on his joints when CTM came out with the 300m joints. A little bird told me that someone else is thinking of getting into the 300m ujoint scheme though.....

hmm, so were they ever tested?

hmm, so were they ever tested?

Yes, we broke them.

Pics???
Or a little description to where and how it broke?

ok, well i guess it doesn't matter now since they aren't being sold...I found this thread on page 1097 while searching for some other stuff earlier :)