|
: Emergency help needed: torque specs reddwarf 09-15-2001, 11:50 AM I am working on a Dana 30. I need to know the torque specs for the carrier bearing caps and the spindle studs. Oh, yeah, I have about 3 hours to get it back together. TIA <IMG SRC="smilies/cool.gif" border="0"> BossBuilt 09-15-2001, 12:15 PM Bearing cap nuts are 60 ft lbs.....ring gear bolts are 55 ft lbs. Back lash....6-10 .000 New pinion bearing preload 12-15 .000 Used........................6-8 .000 BossBuilt 09-15-2001, 12:25 PM Originally posted by BossGrip: <STRONG>Bearing cap nuts are 60 ft lbs.....ring gear bolts are 55 ft lbs. Back lash....6-10 .000 New pinion bearing preload 12-15 .000 Used........................6-8 .000</STRONG>I think the spindle is around 30-35 ft lbs, but I can't find those specs... roverhybrids 09-18-2002, 01:10 PM Originally posted by BossGrip Bearing cap nuts are 60 ft lbs.....ring gear bolts are 55 ft lbs. Back lash....6-10 .000 New pinion bearing preload 12-15 .000 Used........................6-8 .000 Is this pinion bearing preload with the seal in place and applicable to a dana 35? IE is 12-15 in lbs the propper spec for the preload on a dana 35 (crush sleave style) with new bearings and seal(carrier out)? Oxjockey 09-18-2002, 02:56 PM Way to resurrect a year old thread! :D | |