PDA

: I fianlly got my 60 in oh yeh-

onetoncv
07-16-2002, 09:47 PM
damnit after alot of time messing around i Did it - its in there - and the springs are hung and its brake time ! plumb the calipers and do a little spring work up front and i'm off- Jess :D
boz88xj
07-16-2002, 09:47 PM
Very cool...

Lets see some pics!
onetoncv
07-16-2002, 09:52 PM
okay tom. - i went 35 spline and full spool- what a job on stock spindles - and disk brakes using ford rotors - and of course 1410 off the pinion and a 1350 c/v at the t-case - hehe- and a bit of spring inboarding on the frame - shackle angle set so the springs are a bit flat- thanks to erik and his handy work- :D - things are finally looking like its going to move - with work being buisy and family being sick for 2 weeks its put a damper on stuff - now all i need is a 60 front and a little set up air locker and such and i'm done - for now i have thw 44 exploder up front with 38.5 and 5-760 joints just waiting for problems hehe- :D a doubler and 454 are in the sights now - Jess :D
Wilson
07-16-2002, 11:04 PM
It's about damn time :flipoff2:
onetoncv
07-17-2002, 10:50 AM
and #1
onetoncv
07-17-2002, 10:51 AM
#2
onetoncv
07-17-2002, 10:52 AM
#3:D sort of similar to a pro rock right? :D
ashmanjeepXJ
07-17-2002, 12:04 PM
Did you run out of paint? bummer.....

looks GREAT, GRAND.....WONDERFULL.

have fun with the project
CJ
07-17-2002, 12:06 PM
Whos gonna make the driveshaft:D
reddwarf
07-17-2002, 12:27 PM
I like the spring inboarding. I'm gonna do that too eventually.

Send me those exploder shafts after you get the front 60 in ;)
rodzzilla
07-17-2002, 04:30 PM
Sure, no picture of the front end! I'm sure the hubs are nice.:D

Later.
onetoncv
07-17-2002, 09:03 PM
wel i actually had mismatch hubs and backing plates and hubs - had toi steel them from a 10 bolt donor mike ladd of bent + twisted set me up with- but i do appreciate the help and they almost worked- Jess:D
vova
07-17-2002, 09:52 PM
Tell me that is NOT chrome paint :flipoff2:
onetoncv
07-17-2002, 10:18 PM
cast blast damnit- not even close to chrome:flipoff2: Jess
tuckster
07-18-2002, 07:30 AM
Jess, just curious
how far apart are your spring perches?
tj7
07-18-2002, 08:12 AM
hey jess...is that rock ring from avalanche? if it is is it real stout or is it flimsy... just checking man looks nice but IMHO run to lowes and get some more paint bahahahahaha!:D
onetoncv
07-18-2002, 08:37 AM
its a modified avalanche cover 1/4 thick not cheesy at all- 32 on the springs on center- :D Jess
Jeff427
07-18-2002, 08:07 PM
Cool, Jess. Good to see you have been making some progress :D.
onetoncv
07-18-2002, 08:53 PM
And the driveline showed up today -hehe- .120 wall - i called Jess said what the heck-? realized i was on the voice mail talking to myself -Hehe , drove it today she needs some shocks - and i need to get rid of the proportining valve and run my 2 lb residual check valves front and rear- then we will be ready to test - Jess:D