4link40
04-30-2008, 06:59 PM
The Blister is up for sale, it started as an 1984 chevy 3/4 ton longbed and slowly evolved to a buggy. I am starting a construction company and need the money to get the buisness going.
Specs:
Motor/fuel
Tbi goodwrench 350
22 gallon fuel cell
Inline fuel filter
p5001 electric fuel pump
Tranny/t-case
sm465 4-speed
np203 wagoner machine doubler to a ford np205
Steering
Full hydro steering
RockDog (www.rockdog4x4.com) steering arms backwards to put tie rod out back
8" stroke 2" bore steering ram
stock chevy ps pump modified to hold more fluid
tranny cooler inline
char-lynn orbital valve
Front Axle
78-79 ford hp 60
35 spline spicer shafts inner and out
warn drive flanges
reinforced diff cover
Front Suspension
4" bds leaves in stock location
Bilstein shocks
Rear Axle
14 bolt
chevy front disk brakes
homemade rear diff cover (1/4 plate)
Rear Suspension
Double triangulated four link
Blue torch brackets
16" travel 2" fox shocks
1500lb rear suck down winch
Tires/Rims
44" TSL swampers with some good wheelin on them
16.5x9.75 steel wheels with internal homemade safety rings
Misc.
The blister has the stock frame from the front to behind the seats, from there back it is 1 3/4" hrew tubing. It currently has a broken pass side inner axle shaft otherwise its ready for wheelin. I am selling it for $5500 obo (shipping can be arranged on your $). You can contact me @ sstripto@hotmail.com or By phone (603)781-4878 my name is steve and i'll be happy to answer any questions or set a time for you to see it. The buggy is in Dover, New Hampshire. Id be happy to email any photos needed.
http://forum.neow.net/index.php?act=attach&type=post&id=19077
http://forum.neow.net/index.php?act=attach&type=post&id=19078
http://forum.neow.net/index.php?act=attach&type=post&id=19075
http://forum.neow.net/index.php?act=attach&type=post&id=19076
Specs:
Motor/fuel
Tbi goodwrench 350
22 gallon fuel cell
Inline fuel filter
p5001 electric fuel pump
Tranny/t-case
sm465 4-speed
np203 wagoner machine doubler to a ford np205
Steering
Full hydro steering
RockDog (www.rockdog4x4.com) steering arms backwards to put tie rod out back
8" stroke 2" bore steering ram
stock chevy ps pump modified to hold more fluid
tranny cooler inline
char-lynn orbital valve
Front Axle
78-79 ford hp 60
35 spline spicer shafts inner and out
warn drive flanges
reinforced diff cover
Front Suspension
4" bds leaves in stock location
Bilstein shocks
Rear Axle
14 bolt
chevy front disk brakes
homemade rear diff cover (1/4 plate)
Rear Suspension
Double triangulated four link
Blue torch brackets
16" travel 2" fox shocks
1500lb rear suck down winch
Tires/Rims
44" TSL swampers with some good wheelin on them
16.5x9.75 steel wheels with internal homemade safety rings
Misc.
The blister has the stock frame from the front to behind the seats, from there back it is 1 3/4" hrew tubing. It currently has a broken pass side inner axle shaft otherwise its ready for wheelin. I am selling it for $5500 obo (shipping can be arranged on your $). You can contact me @ sstripto@hotmail.com or By phone (603)781-4878 my name is steve and i'll be happy to answer any questions or set a time for you to see it. The buggy is in Dover, New Hampshire. Id be happy to email any photos needed.
http://forum.neow.net/index.php?act=attach&type=post&id=19077
http://forum.neow.net/index.php?act=attach&type=post&id=19078
http://forum.neow.net/index.php?act=attach&type=post&id=19075
http://forum.neow.net/index.php?act=attach&type=post&id=19076