ya i know im go'n to get alot of shit for asking this question, so here it gos...... this is what i want out of my 205, 2wd low, and front wheel drive in low/high.. and i did search on "how to" cut the rails, can you also use the stock shifter to run that setup? please try not to flame too hard thanks:smokin:

the stock shifter is not going to allow you 2wd lo or the front high/low control only. you must twin stick. you can use 2 stock stick on a longer shaft bolt.

ya i have another shifter, the truck use to have a 203 now a 205:D so i would have to just get a longer bolt for the shifters?

you have to make one. there is a few people that have done it in the past. if you could find a second bolt i would just cut the head off of one and the shank of another, weld.....

cool ill have to try that.. on the shift rails shouldi just buy new ones or grind my old ones? if i grind my old ones were the hell do i do that?

search the pics and diagrams are here.

i think ord sells them ready to go though.

Twin sticks. You can use the stock shift rails one of them just has to be grinded a little bit. REALLY easy to do.

http://i62.photobucket.com/albums/h104/robert97dodge/Chevy%20truck/Chevy%20rebuild/IM004709.jpg

Heres how I did mine. 9/16" bolt. Sleeved the stock shifters with conduit. Ground the original rails. Notice the original linkages also. The sleeves on the rails are just pipe with a tab welded to it. I used kitamatdudes write up (http://www.pirate4x4.com/forum/showthread.php?t=572617&highlight=Twin+stick+205)for pointers.

http://www.pirate4x4.com/forum/attachment.php?attachmentid=363915&d=1207626143

http://www.pirate4x4.com/forum/attachment.php?attachmentid=363916&d=1207626195

I wrote a tech article on this exact topic here....
http://pirate4x4.com/forum/showthread.php?t=572617&highlight=twin+stick+cheap
I cleaned it up, removed the chat and put it here:

http://www.4x4mecca.com/forum/vbarticles.php?do=article&articleid=32

Everything you need to know about twinstick but were afraid to search...:flipoff2:

very clean setups, guys. and good photos, too.