: Official Con Meet times


jdjanda
07-18-2002, 12:27 PM
OK, what time do you plan to make it Loon?

Mark, Josh, Amanda, and myself all leaving Antioch by 7:00 AM to meet up with Mike, and crew at the Chevron (?) in Pollock Pines between 10-11

Bob, Steve you guys want to meet up at the Chevron also

Who's heading in late, I know Abba, Joel, and RS are we'll meet up at the box around ~8-9.

If you need to reach me 925-209-6165 until about 1-2 tomorrow

Channel 14 on the CB

Rock Tractor
07-18-2002, 12:43 PM
We are gonna meet at 8 at the station in Pollock pines and head out. We are gonna go slow so you guys can catch us. Or we will wait till about 1:30 or 2 at spider. Head threw Old Sluice and into Buck, Inertubes and fishing poles:) :)

Scout Dude
07-18-2002, 03:05 PM
OK, I am leaving tomorrow around 3-4ish..might be at the box as early as 6:30ish..but we will hang out and maybe fish Spider a little...Either way, I'll be on channel 14 and will try to get ahold of someone when we get there. RS will probably be showing up a little later. He isn't leaving until 5 or 6ish. He doesn't have a cb but we have handheld radios...

Old Scout
07-18-2002, 09:39 PM
Steve and I will leave at 8:00 from stocktone. Pollock pines at 10:30 should work. My cell is 209-482-7533.

jdjanda
07-18-2002, 10:47 PM
Originally posted by Old Scout
Steve and I will leave at 8:00 from stocktone. Pollock pines at 10:30 should work. My cell is 209-482-7533.

Can't wait to pop the cherry on Steve's Scout :D

Rock Tractor
07-18-2002, 10:53 PM
Joe, are you ready?

Old Scout
07-18-2002, 11:07 PM
Originally posted by jdjanda


Can't wait to pop the cherry on Steve's Scout :D

I had it up on two wheels in Hollister at the 2000 International West Coast Regional . It would of been a real shame to flop it. It took 1st place show n shine in the 1978-80 100" class latter that day

jdjanda
07-19-2002, 02:34 AM
Originally posted by Mike Elrod
Joe, are you ready?

Quarter to 2 and my sheet is ready :D

OBA is not installed, but I'll have the compressor with me to install if needed.

Joe

Old Scout
07-19-2002, 08:10 AM
Originally posted by jdjanda


Quarter to 2 and my sheet is ready :D

OBA is not installed, but I'll have the compressor with me to install if needed.

Joe

About time!:flipoff2: Josh ready????

Scout Dude
07-19-2002, 08:25 AM
Originally posted by Old Scout


About time!:flipoff2: Josh ready????

Weren't you supposed to have left by now?:flipoff2:

It's gonna be a slow day without all the norcal Scout people here. All you Wa folks will have to keep me company 'til I get off of work...:(

Hooper
07-19-2002, 09:53 AM
Originally posted by Scout Dude


Weren't you supposed to have left by now?:flipoff2:

It's gonna be a slow day without all the norcal Scout people here. All you Wa folks will have to keep me company 'til I get off of work...:(

Sorry. Probably won't be able to help you there. Don't want to get accused of chit chat again for talking about spring perches and ubolts on the pirate board. After all, that is way too low tech for the So Cal crowd....

Scout Dude
07-19-2002, 10:39 AM
Originally posted by Hooper


Sorry. Probably won't be able to help you there. Don't want to get accused of chit chat again for talking about spring perches and ubolts on the pirate board. After all, that is way too low tech for the So Cal crowd....

Well, you have to admit, that thread was kinda :rainbow: :p

SSGTWC
07-19-2002, 10:59 AM
Originally posted by Scout Dude


Well, you have to admit, that thread was kinda :rainbow: :p

Yes..............Yes it was!

Hooper
07-19-2002, 12:31 PM
Originally posted by Scout Dude


Well, you have to admit, that thread was kinda :rainbow: :p

My momma always saayyeeed,

rainbow is as rainbow does/says