i have a 91 xj with no gauges or any sort of dash.

does anyone have a picture of a custom sort of dash setup that is installed in a cherokee. i was just thinking of getting a sheet of aluminum, bending and cutting till it fit but still not sure......:confused::

http://www.jegs.com/i/Jegster/550/40512/10002/-1

trim to fit


or just keep the dash there and put gauges in it (remove stock ones)

Cage it and hang after-market gauges across the dash bar. With no dash, in place, the pre-97 XJ is a roomy cabin. With a custom cage I see no problem fitting 4 average people and plenty of gear/spares/supplies into that setup.



I run a '94 2 dr with no dash; mounted the stock guage pod to the firewall in the ctr as a temporary setup.

Crappy pic, but you get the idea:

http://i6.photobucket.com/albums/y208/aan12182/yeller/0609071717.jpg

where are you located???

Why not get a dash from a fully optioned XJ? Around here, that's about $25 and 15 minutes at the yard.

This is in my jeepspeed..
http://i110.photobucket.com/albums/n98/NRT_Chris/Dash1.jpg

This is in my jeepspeed..
http://i110.photobucket.com/albums/n98/NRT_Chris/Dash1.jpg

Is this a Jeepspeed or a look a like!!!!!! :stirthepot: Real Jeepspeed finish the race!!! :lmao:

cdc12372: You wish you had my skills :smokin:

i am not sure i can make something like that but well see what happens ill post pics of the progress once i begin.

I just took out the factory stuff made a sheet metal face and installed aftermarket gauges.

Was the easiest solution.


http://www.wheelingarizona.com/forums/files/thumbs/t_gauges_389.jpg (http://www.wheelingarizona.com/forums/files/gauges_389.jpg)

http://www.wheelingarizona.com/forums/files/thumbs/t_seats_787.jpg (http://www.wheelingarizona.com/forums/files/thumbs/t_seats_787.jpg)

:flipoff2: