|
randii 10-08-2001, 11:45 AM Is there a chance in hell that I can ship a stripped Dana 60 UPS (gotta be under 150 pounds)? When I say stripped, I mean nothing but the center housing, the tubes, and the inner knuckles... no carrier, no bearings, no seals, no nuthin.... Randii Lance 10-08-2001, 12:22 PM the housing weighs about 100lbs so it shouldn't be a problem. I thought RC60's were <IMG SRC="smilies/rainbow.gif" border="0">? <IMG SRC="smilies/wink.gif" border="0"> FordPowr.. 10-08-2001, 01:34 PM If the housing alone weighs 100 lbs....then there's no way the the housing with tubes and inner knuckles will weigh under 150 lbs. I bet it weighs 200 lbs. dangerber 10-08-2001, 02:08 PM I think Lance means the housing as in the diff, tubes, and inner knuckles. That is generally what a "housing" is. <IMG SRC="smilies/biggrin.gif" border="0"> DRM 10-08-2001, 02:21 PM Why are you set on using UPS? YellowFreight, ForwardAir.. lots of people out there who will ship it... FordPowr.. 10-08-2001, 02:22 PM That may be what he meant....but there's no way a RC front minus the outer knuckles, axle shafts and carrier weighs 100 lbs....those fawkers are heavy Lance 10-08-2001, 02:23 PM I am referring to a center section, tubes, and the C's. It's not very heavy. DRM 10-08-2001, 02:23 PM Give a call to whoever sells just the bare Terra low-pro center chunks - find that out, then figure in the inner knuckles and tube... Should be able to get a good close guesstimate that way... dangerber 10-08-2001, 02:30 PM How about that freightpro I hear about??? They'll drop the dirty moFo right on your doorstep! <IMG SRC="smilies/biggrin.gif" border="0"> randii 10-08-2001, 02:47 PM I have no problems with RC front 60s, just RC *REAR* 60s. <IMG SRC="smilies/thefinger.gif" border="0"> Randii randii 10-08-2001, 03:00 PM Why are you set on using UPS? YellowFreight, ForwardAir.. lots of people out there who will ship it... Seller's choice, not mine. The deal is still up in the air, shipping may make up half the cost. <IMG SRC="smilies/rolleyes.gif" border="0"> Still could be a good deal, just not sure 'tis worth the work. Randii AtomicBeesting 10-08-2001, 03:06 PM I had shipped to me the same exact thing... RC60, tubes and C's. With the pallet, I think they billed it as 150lbs. Aggro 10-09-2001, 06:49 AM I weighed one of mine...155lbs center, tubes, and c's. Ant 10-09-2001, 12:53 PM I calculated the density of the tubes alone on a front D60 (1/2" wall tubes) and guessing 36" of tube, thats 45 lbs. alone!! <IMG SRC="smilies/eek.gif" border="0"> <IMG SRC="smilies/eek.gif" border="0"> Lance 10-09-2001, 12:57 PM Originally posted by Aggro: <STRONG>I weighed one of mine...155lbs center, tubes, and c's.</STRONG> What can I say? I don't know my own strength! <IMG SRC="smilies/grinpimp.gif" border="0"> FordPowr.. 10-09-2001, 01:18 PM <IMG SRC="smilies/thefinger.gif" border="0">...Damn....I think my complete RC 60 was almost 500 lbs. The rest of the fawker must be made of lead <IMG SRC="smilies/biggrin.gif" border="0"> <IMG SRC="smilies/biggrin.gif" border="0"> | |