wrangler4x4_97
05-27-2008, 09:19 AM
So im tired of seein the rig sit and i have no money to take it out so seeing if anyone wants to have a good rig.
97 TJ
2.5l / ax 5
4:1 231 novak shifter
103" WB
38" TSLs on TR beadlocks with forged alcoa wheels
Wheels are 5x5.5 and have 1.25" adapters on all 4 wheels
rubi 44 up front with alloy shafts/ rockcrusher cover/ alumiflex tie rod
8.8 rear with alloy shafts and detroit/ rock ring cover
4.88s
BTF tube fenders with inner fenders made into them.
4 rock lights wired in all the way around.
I have RE 3.5 springs all the way around.
Front has the RE long arm setup with the old style RE skid( solid one piece)
Rear is stretched with a double triangulated 4 link.
1.5" .250 wall links
heims on all 8 rear links
7/8" lower heims and 3/4" upper heims
On the rear stretch the frame has been cut 10 inches behind stock coil mounts. I have never finished the rear frame completly so no rear tow point but has never been a problem.
Custom roll cage made with 1 3/4 .120 wall DOM
Corbeau seats are tied into cage
The cage is only currently tied into the rear portion of the frame but easily could tie in the other 4 corners.
No Limits stinger and winch plate welded to frame with a Mile Marker 8000
Currie AntiRock sway bar up front
Spare drive shafts F/R
Spare rear 8.8 shafts
Spare 44 shafts.... mix and matched sets need to be completely assembled. With the 38s i would consider them to only get off the trail if broken in a bad spot
THE BAD
Steering box is DONE pretty sure the pump should be replaced too.
Could use a new draglink
Also needs to have the frame in the rear finished and have a stick of 1.5" to finish it with
If want it to look nice needs a paint job and some crusher corners as well
Needs new rockerguards as well i have BEAT the CRAP out these and they are well dented
Jeep has windsheild still. Only have a bikini top that goes as well.
http://img373.imageshack.us/img373/1330/2658651630098084959bjrbeo3.jpg[/
[URL=http://imageshack.us]http://img509.imageshack.us/img509/4470/deleon148qf3.jpg (http://imageshack.us)
as the rig sits now:
http://img509.imageshack.us/img509/6563/lf43fb7cf5a5838d01fcc77gb6.jpg (http://imageshack.us)
Asking $9,750
For $11,000 will include a 16ft carhauler with diamond plate fenders. Toolbox on front and fairly new tires. Also will come with all tie downs
97 TJ
2.5l / ax 5
4:1 231 novak shifter
103" WB
38" TSLs on TR beadlocks with forged alcoa wheels
Wheels are 5x5.5 and have 1.25" adapters on all 4 wheels
rubi 44 up front with alloy shafts/ rockcrusher cover/ alumiflex tie rod
8.8 rear with alloy shafts and detroit/ rock ring cover
4.88s
BTF tube fenders with inner fenders made into them.
4 rock lights wired in all the way around.
I have RE 3.5 springs all the way around.
Front has the RE long arm setup with the old style RE skid( solid one piece)
Rear is stretched with a double triangulated 4 link.
1.5" .250 wall links
heims on all 8 rear links
7/8" lower heims and 3/4" upper heims
On the rear stretch the frame has been cut 10 inches behind stock coil mounts. I have never finished the rear frame completly so no rear tow point but has never been a problem.
Custom roll cage made with 1 3/4 .120 wall DOM
Corbeau seats are tied into cage
The cage is only currently tied into the rear portion of the frame but easily could tie in the other 4 corners.
No Limits stinger and winch plate welded to frame with a Mile Marker 8000
Currie AntiRock sway bar up front
Spare drive shafts F/R
Spare rear 8.8 shafts
Spare 44 shafts.... mix and matched sets need to be completely assembled. With the 38s i would consider them to only get off the trail if broken in a bad spot
THE BAD
Steering box is DONE pretty sure the pump should be replaced too.
Could use a new draglink
Also needs to have the frame in the rear finished and have a stick of 1.5" to finish it with
If want it to look nice needs a paint job and some crusher corners as well
Needs new rockerguards as well i have BEAT the CRAP out these and they are well dented
Jeep has windsheild still. Only have a bikini top that goes as well.
http://img373.imageshack.us/img373/1330/2658651630098084959bjrbeo3.jpg[/
[URL=http://imageshack.us]http://img509.imageshack.us/img509/4470/deleon148qf3.jpg (http://imageshack.us)
as the rig sits now:
http://img509.imageshack.us/img509/6563/lf43fb7cf5a5838d01fcc77gb6.jpg (http://imageshack.us)
Asking $9,750
For $11,000 will include a 16ft carhauler with diamond plate fenders. Toolbox on front and fairly new tires. Also will come with all tie downs