208 Tcase Probs
Haven't opened a 208 b4, I lost 2-high today, only 4 low works..
Sawks, Im 1500 Miles away . No output at all from case front or rear in 2high/4high...

Are there shifter forks in these cases? Also 4low sounds a lil pissed, but works.

Yeah the case has a shifter fork.

The shift linkage is adjustable so play with that before you go taking it out.

Adjustment? Doesnt look like it on the outside of the case? It just Bolts on and is has a keyway, Im not seeing a way to adjust it here...

I dont think Its just out of adj, but that would be nice..
Checking it in the morning.....

Of Course it has to be 100 outsida while all this is goin on.
I pulled a schematic of the case, looks like one of the gears might have grenades..Finally..
460 :) :(

Sounds like a blown range fork. I've been through a few myself, the last one I bought was around $55 (but this was a few years ago).

Shifter linkage on the 208s is critical, if its off, it will wear out the range fork real quick. Shop manual has the procedure on adjustment.

Pete

THE FORK GOES BUT ALSO THRUST WASHER / BEARING BEHIND INPUT WILL TAKE A SHIT AND EAT FRT CASE HALF UP IF ITS RANGE FORKS HAVE A BOX OF EITHER NEW ONES 25.00 EACH (G.M.) THE LAST TO I FIXED WERE BECAUSE OF STANDARD PROBLEM NO FLUIDS

Thanks for the ideas, Ill post what it was in about 3 weeks , when I get back here...