|
: Is this a 28 spline 9"? Pics Sharp 07-20-2002, 06:19 PM http://groups.msn.com/TheMINIHummer....msnw?Page=Last it's on a 70 mustang, we measured it to be 59" wide, will that work for a TJ conversion, how is a 28 spline 9" for strength compared to a D35? can anyopne tell if it's a 8" thanks. Mo 07-20-2002, 06:21 PM linkie no workie edit: do you mean this: http://groups.msn.com/TheMINIHummer/weldingprojects.msnw?action=ShowPhoto&PhotoID=1098 then yeah, that's a 9" edit again: the one here: http://groups.msn.com/TheMINIHummer/weldingprojects.msnw?action=ShowPhoto&PhotoID=1098 Mo 07-20-2002, 06:27 PM ps... that's a blastin'n'blingin' shifter knob you've got there ;) Kensoffroad 07-20-2002, 06:29 PM I found one that was 59 inches wide also it was a 9 incher 28 spline out of a 69 ranchero.I dont know about the strength but a 9 inch has got to be better then a 35 even with 28 splines and it should be easy to upgrade the shafts.I never got the one .I found because i decided to go with a 60. Sharp 07-20-2002, 08:47 PM http://groups.msn.com/TheMINIHummer/weldingprojects.msnw that's the one mo and i mean that's the axel not the shifter knob Mo 07-20-2002, 08:53 PM just for everyone's amusement :evil: http://groups.msn.com/TheMINIHummer/newshifterboot.msnw?action=ShowPhoto&PhotoID=345 does all that 'carbon fiber' make your jeep wheel better? :flipoff2: Sharp 07-20-2002, 08:55 PM hey so i like the looks of it sue me. :p Sharp 07-20-2002, 08:58 PM you think my shifter is bad..... :p brace yourself!!! http://jeepkings.ca/6/ubb.x?a=tpc&s=58960324&f=89960324&m=378605445 | |