CaptainAwesome
05-31-2008, 03:38 PM
This thing bolts right into a Jeep Rubicon. The driveshaft employs the larger 1350 u-joints in the CV for more angle and strength.
This one is 16.5" collapsed and 19.5" extended and worked perfect on my TJ with a long-arm lift and 5 1/2" springs. I also had a flat belly pan that lifted the transfer case an inch or two.
If you have a Jeep Rubicon and you are going to lift it, you need to buy this now for $400 shipped.
Pictures: http://picasaweb.google.com/leipold/REDriveshaft
I am not sure if the link below is the correct one. It says it is for a short-arm lift, but mine works with a long-arm, for sure.
RE's Website (http://www.rubiconexpress.com/Products.aspx?Cn=330&Pn=1849&XnPath=320,321,329,330&Vid=D9844B5116007)
This one is 16.5" collapsed and 19.5" extended and worked perfect on my TJ with a long-arm lift and 5 1/2" springs. I also had a flat belly pan that lifted the transfer case an inch or two.
If you have a Jeep Rubicon and you are going to lift it, you need to buy this now for $400 shipped.
Pictures: http://picasaweb.google.com/leipold/REDriveshaft
I am not sure if the link below is the correct one. It says it is for a short-arm lift, but mine works with a long-arm, for sure.
RE's Website (http://www.rubiconexpress.com/Products.aspx?Cn=330&Pn=1849&XnPath=320,321,329,330&Vid=D9844B5116007)