xjcutter
06-01-2008, 02:49 PM
Bought this used about a year ago guy that I bought it off of said he used it 5-6 times and I have used it twice to buildup worn bearing surfaces I would like to get NEW PRICE $60.00 shipped in the 48 but am open to trades for Cherokee lift parts or ford 9” parts. It has some of each powder left the only thing missing is the aerosol metal cleaner wich any metal cleaner will work and the tip cleaners with any tip cleaners will work. The two time I used it it worker wonderfully. Below is what the cover says.
The EXR-KUL powder metal flame system is a process to buildup, repair and overlay cylindrical parts such as shafts, rods, rollers, ect. Powder is fed into a oxy-fuel flame, melted and thrust onto the part rotating in a lathe. The buildup is then finished by machining or grinding to the final dimensions.
For buildup on any metal surface, including aluminum, brass, bronze, cast iron, nickel alloys, steel and stainless steel.
http://i22.photobucket.com/albums/b349/devin86/001-2.jpg
http://i22.photobucket.com/albums/b349/devin86/004.jpg
Designed for simplicity - requires no flow meters, complicated adjustments or extensive knowledge of metalizing.
The EXR-KUL powder metal flame system is a process to buildup, repair and overlay cylindrical parts such as shafts, rods, rollers, ect. Powder is fed into a oxy-fuel flame, melted and thrust onto the part rotating in a lathe. The buildup is then finished by machining or grinding to the final dimensions.
For buildup on any metal surface, including aluminum, brass, bronze, cast iron, nickel alloys, steel and stainless steel.
http://i22.photobucket.com/albums/b349/devin86/001-2.jpg
http://i22.photobucket.com/albums/b349/devin86/004.jpg
Designed for simplicity - requires no flow meters, complicated adjustments or extensive knowledge of metalizing.