thebignasty
07-21-2002, 02:28 PM
im looking for a dealer that has a 12" suspension lift for my 77 f250 and i havent had much luck so far so im gonna ask you guys for any info. thx.
|
gearrat 07-21-2002, 03:24 PM have you tryed skyjacker? thebignasty 07-21-2002, 05:02 PM the biggest skyjacker lift i could find on the net is a 9" offroadr35 07-21-2002, 05:30 PM Originally posted by thebignasty the biggest skyjacker lift i could find on the net is a 9" you're not going to be able to get 12" of suspension lift without some serious blocks. Why do you need such a huge lift? If you must do it go with the 9" and then a 3" body lift. BTW, you're definitely on the wrong website -Steve Rerard 07-21-2002, 05:32 PM Are you looking for a suspension lift or a suspension kit? It sounds like your looking for a kit, I dont believe one is available, as for lift, the components are out there. But like someone else alreay mentioned, why would you want that much? try: www.customtruckshowcase.com thebignasty 07-21-2002, 05:49 PM well the only reason i need one is too run 44"s without cutting out my fenders, if i can run em fine with a 9" suspension and 3" body that would be cool. Chad H 07-21-2002, 06:07 PM Originally posted by offroadr35 you're not going to be able to get 12" of suspension lift without some serious blocks. Why do you need such a huge lift? If you must do it go with the 9" and then a 3" body lift. BTW, you're definitely on the wrong website -Steve No, your Not... I'd say that 9" and a 3" body might clear, but it sounds like you have a rust free straight body, and dont want to cut the fenders....... Bushwhacker cutouts look great on those rigs... Some of the guys/gals have Rocks on the brains thats all... Feel free to ask any Q's ya have, sont mind some of these guys.... thebignasty 07-21-2002, 06:15 PM Originally posted by The Chad No, your Not... I'd say that 9" and a 3" body might clear, but it sounds like you have a rust free straight body, and dont want to cut the fenders....... Bushwhacker cutouts look great on those rigs... Some of the guys/gals have Rocks on the brains thats all... Feel free to ask any Q's ya have, sont mind some of these guys.... Its not completely rust free and it has the usual truck bed dents but if i can fit the 44"s under it without cutting out the fenders i would be happy. But if not oh well, the sawzall is king :). John Deere Ranger 07-21-2002, 08:12 PM have custom springs made by National or something SAWZALL RULES ONETUFF76 07-21-2002, 10:48 PM custom springs, new custom hangars, and some money for the steering. Oh don't forget you may want to realign your pinion angle after you've done that much lift so you may have to do some axle work too. Rock Puppy 07-22-2002, 05:51 AM I was wantint to do the same to my 71 pickup... I picked up a set of 12" chevy subruban springs from sky jacker and planned on relocating the spring perches to make it fit centered.... That way you wont need any blocks up front. You can then run a 8" rear springs with a 4" bock and clear the fenders fine.... FearMe 07-22-2002, 07:19 AM Try this http://www.wtf.com tmillspaw 07-22-2002, 10:11 PM whiplash suspensions might have something to help you out. I know they deal with a lot of newer ifs trucks, but you might try 'em and see what they have | |
vBulletin® v3.8.6, Copyright ©2000-2012, Jelsoft Enterprises Ltd.